Ballard Designs Paulette Pantry SK012 User manual

PRODUCT NAME: Paulette Pantry
ITEM NUMBER: SK012
DIMENSIONS OF ITEM ASSEMBLED: 83 3/4”H X 28”W X 18 1/4”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
3/11/2015 Page 1 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
TOOLS NEEDED:
-Requires a screwdriver.
-Power drill suggested.
-Assembly requires 2 or more people.
Hardware Located
Here (A-D)
Shelves (E)
Shelves (E)
Ltr.
E 2
Qty. Components
NOTE: When unpacking, lay the parts on
a padded surface such as the packaging provided.
Be sure to locate all hardware before throwing
away any packaging.
NOTE: Assemble the Pantry in desired location for use.
L-Brackets
Long Screws
Ltr.
C
B Shelf Supports
2
12
Qty. Hardware Included Ltr. Qty.
A
16
D 8
Anchors
Hardware Included
IMPORTANT:
Installing the L-Bracket (C) to a Wall Stud
and the Pantry is REQUIRED before any
use of the product for customer safety.

STEP 2:If the door is uneven, adjust the levelers on the bottom corners of the Pantry. Turn Clockwise
or counterclockwise until the door is even.
Page 3 of 5
STEP 1:Place the Shelf Supports (B) at the desired Shelf heights and lay the Shelves (E)
on the Supports. The plate groove should be located at the back of the Pantry.
NOTE: Assemble the Pantry in desired location for use.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(E)
(B)

Wall
Studs
Page 4 of 5
IMPORTANT:
Installing the L-Bracket (C) to a Wall Stud
and the Pantry is REQUIRED before any
use of the product for customer safety.
STEP 3:Center the Pantry in front of two Studs and mark the Wall. Push the Pantry against the Wall.
NOTE: Assemble the Pantry in desired location for use.
Slide the L-Bracket (C) over the top corner of the Pantry Top in front of the previously marked
Stud and mark the Wall at the top of the L-Bracket.
NOTE: It is important that the L-Bracket is positioned like the picture below in order to
hide the Bracket.
STEP 4:
Wall
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)

(B)
Wall
Wall
Page 5 of 5
NOTE: Assemble the Pantry in desired location for use.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)
(A)
(D)
(C)
STEP 5:Pull the Pantry away from the Wall and attach the L-Brackets (C) to the Studs using
the Long Screws (A). If there are not Studs in the desired Pantry location, lightly tap in
the Anchors (D) and attach the L-Brackets with the Long Screws.
Slide the Pantry underneath the previously installed L-Brackets (C) and use 2 or more of
the Long Screws (A) to attach the L-Brackets to the Pantry.
NOTE: The L-Brackets may not be completely on the Pantry ’s Top due to the Wall’s base
molding. Only screw into the Bracket holes that are completely on the Pantry Top.
STEP 6: