Ballard Designs Savoy MB488 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 4/3/2018 Page 1 of 4
PRODUCT NAME: Savoy Spool Bed- Queen
ITEM NUMBER: MB488 (MB486 Queen)
DIMENSIONS OF ITEM ASSEMBLED: 57 3/8”H x 65 1/2”W x 84 1/2”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN VIETNAM

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Ltr.
A 1
B
Wrench
Half Moon Washer8
Qty. Hardware Included
Ltr.
FFootboard (G)
G
1
1
H
I
2
5
J 5
Qty. Components
C 8 Spring Washer
D Nut8
E 8 Bolt
TOOLS NEEDED:
-Two person assembly
suggested.
NOTE: When unpacking, lay
the parts on a padded surface
such as the packaging provided.
Be sure to locate all hardware
before throwing away any
packaging.
Support Bar (I)
Support Leg (J)
Headboard (F)
Side Rail (H)

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(B)
(A)
STEP 1: Screw the Bolts (E) into the Headboard (F) and Footboard (G) as shown .
Align the holes in the ends of the Side Rails (H) with the Bolts (E) in the Footboard (G). Insert
the Bolts into the Side Rails and, on the inside of the Side Rail, insert the Half Moon
Washer (B), Spring Washer (C) and Nut (D) onto the Bolt and tighten with the Wrench (A).
Repeat on the Headboard (F).
STEP 2:
(F)
(F)
(G)
(G)
(E)
(E) (C)

(I)
(J)
Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Attach the Support Legs (J) to the Support Bars (I). Tighten completely.
Set the Support Bars (I) on the Side Rails (H) as shown.
STEP 4:
The Support Legs at the
Head and Foot of the bed
are optional for extra support.
(I)
(H)