Ballard Designs MELISSI TC315 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
MADE IN CHINA
MELISSI WINE CONSOLE
TC315
31"W x 12"D x 35"H
完整圖 (線條圖即可)

N°
Qty
Hardware
A
12
6mm dia x 16mm long
B
1
C
2
D
1
E
2
F
2
N°
Qty
Part
G
1
H
1
I
1
J
2
Part bag location
Hardware
here
J is packaged
here

IMPORTANT:
For items with levelers, if doors are not even, adjust
levelers until doors become even.
STEP 1:
A
G
H
I
J
Anti-tip Hardware Instructions:
Step 1
We strongly recommend using the anti-tip hardware provided. To avoid tipping, please use
the anti-tip hardware provided to secure to a wall.
It is preferred that you locate a wall stud in your drywall. If you locate the stud, anchors are
not needed. If there is no stud available, utilize the plastic wall anchors provided.
-Place unit against the wall. Fix one of the metal bracket in the wall about 1” over the top
of the unit. Mark the wall where the bracket will be screwed in. Drill one hole in the wall.
If using the wall anchor, tap it into the drilled hole.
-Secure the bracket using 1 small screw.
-Fix the 2nd metal bracket to the back edge top of the unit using 1 large screw.

Step 2
Thread the plastic cable tie through the brackets as shown in the illustration. Feed through the
other end of the cable tie and pull until snug. Do not overtighten.
WARNING:
Injury may result from tipping furniture.
This restraint is not a substitute for proper adult supervision. This restraint may provide
protection against tipping furniture. Do not all children to climb on furniture. Failure to
detach the restraint before moving furniture may result in injury and damage.
IMPORTANT:
For items with levelers, if doors are not even, adjust
levelers until doors become even.