Ballard Designs Madison JC054 User manual

PRODUCT NAME: Madison Arm Chair
ITEM NUMBER: JC054
ASSEMBLED DIMENSIONS: 36”H x 23 1/4”W X 25”D
Page 1 of 2
MADE IN VIETNAM
90mm Allen Screws
Left Arm (D)
Right Arm (E)
Seat (F)
Wooden Plugs
Allen Wrench
Ltr. Qty. Components
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10-5-2022
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
REQUIRED TOOLS:
Allen Wrench (included)
Qty. Hardware Included
A
Ltr.
6
6
1
B
C
D1
E1
F
1
Do not over-torque assembly screws!
Over tightening may cause wood to crack,
embedded nuts to pull out or other damage.
Avoid power tools. Hand tighten only.
CAUTION

Scan this QR Code
to learn more
regarding
Cleaning and Care
of
OUTDOOR FURNITURE
Back (G)
Seat Cushion (H)
H
G
1
1

Page 2 of 2
(G)
(A)
(A)
(E)
(F)
(B)
(H)
(D)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Occasionally wipe or hose down to remove dirt and debris.
Promptly remove spills.
Do not use harsh chemicals or abrasive cleaners.
STEP 1: Slide tenons on sides of Back (G) and Seat (F) into mortises in sides of Left Arm (D). Insert,
turn and tighten Screws (A). DO NOT OVER TIGHTEN!
STEP 2: Repeat process for Right Arm (E).
Mortise
Tenon
STEP 3: Place assembled chair upright and cover screw heads by inserting a Wooden Plug (B) into
each hole in Leg Assembly.
STEP 4: Set Seat Cushion (H) into place as illustrated.
Assemble in location for intended use.
1
3
2
4