Ballard Designs Savoy MN029 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-3-2019 Page 1 of 2
PRODUCT NAME: Savoy Chest of Drawers
ITEM NUMBER: MN029
ASSEMBLED DIMENSIONS : 36”H x 50”W x 20”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN VIETNAM

Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Anti-Tip Hardware Installation
Attach one Bracket (C) horizontally to the center back of the unit using the Small Screws (A).
Attach the remaining Bracket vertically into the wall 1 inch below the Bracket attached
to the unit using the Large Screws (B). The Large Screws should be driven into a stud in the
wall. Align the Brackets vertically and string in the Retention Belt (D). Confirm Strap is securely laced
and locked.
Ltr.
A 4 Small Screws
B 4 Large Screws
C 4 Brackets
D 2 Retention Belt
Qty. Hardware Included
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
(A)
(B)
(C)
(D)
WALL
STUD
CHEST