Ballard Designs Portico Planter User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 9-30-2020 Page 1 of 3
PRODUCT NAME: Portico Planter
ITEM NUMBER: WE017
ASSEMBLED DIMENSIONS : 6.69”H x 6.10”W x 12.01”D
MADE IN VIETNAM
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 3
Ltr.
A 2
B 2
Qty. Hardware Included
Ltr.
C 1
Qty. Components
REQUIRED TOOLS:
Phillips Screwdriver
Drill, Level, Pencil, Hammer
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Wall Anchors
Screws
STEP 1: Determine location for installation then mark wall for bracket points (Page 3/Tempate Creation).
Optimal support provided when at least one Screw (B) is driven directly into a wall stud. No stud, create a
small hole and tap Wall Anchor (A) in until flush with wall surface. Add Screw (B) then carefully fit keyhole
over and push/pull Planter (C) down to secure in place.
(C)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Planter (C)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers.
Assemble in location for intended use.

Page 3 of 3
1Place a strip of Painter’s Tape over both Keyholes on back of item to be hung.
PAINTER’S TAPE
Use a Screwdriver or other pointed tool to punch a hole in tape at TOP of each Keyhole.
2
Use a Level and Pencil to mark wall at installation location.
3
How to Create a Template for Keyhole Brackets
TOP
OF KEYHOLE
Remove Tape from back of item, place on wall at level line and mark location of punches.
Remove Tape and follow instructions for creating holes and installing specific hardware.
4
PAINTER’S TAPE
P
A
I
N
T
E
R
’
S
T
A
P
E