Ballard Designs Afton Daybed User manual

PRODUCT NAME: Afton Daybed with & without Trundle
ITEM NUMBER: MB118; MB120
DIMENSIONS OF ITEM ASSEMBLED: 37 1/2”H x 91”W X 42 1/2”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE. Page 1 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN USA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
TOOLS NEEDED:
-2 Person assembly.
-Screwdriver required.
Ltr.
A 4 Screws
Arms (B)
Side Rails (C)
Spring Frame (D)
Qty. Hardware Included
Ltr.
B 2
D 1
C 2
Qty. Components
NOTE: It is best to put this bed together in the space where you will use it.

Page 3 of 3
STEP 1: Attach the Arms (B) to the Side Rails (C). Be sure the hook is fully engaged before continuing
with the assembly.
STEP 2: Place the Spring Frame (D) onto the ledges on inside of the Side Rails (C).
Then using a screwdriver and the Screws (A), attach the Spring Frame (D) to the
Side Rails (C) in all 4 corners.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(E)(D)
(D)
(D)
(C)
(C)
(C)
(C)
(B)
(B)
(B)
(A)
(A)
(F)
CLEAN & CARE: Spot cleaning is suggested. The method of cleaning is different
based on what upholstery fabric is used.
NOTE: The Trundle requires no assembly and simply slides underneath the bed.