Ballard Designs Villandry Headboard QUEEN MB495 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-17-2020 Page 1 of 3
PRODUCT NAME: Villandry Headboard (QUEEN)
ITEM NUMBER: MB495
ASSEMBLED DIMENSIONS : 57.28”H x 62.6”W x 2.2”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A 4
B8
Qty. Hardware Included
Ltr.
G 1
Qty. Components
C 4
TOOLS NEEDED:
-Wrench/Allen Wrench (Included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
D
E
F
4
1
1
Allen Bolt
Flat Washer
Lock Washer
Nut
Wrench
Allen Wrench
Headboard
Recommended Bed Frame:
Leggett and Platt K45G/K45R - Queen/King/California King

Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
Attach Headboard (G) to Bed Frame (Not Included) *.
Align Bed Frame Bracket with holes on lower front of Headboard. Place Flat Washer (B)
onto Allen Bolt (A) and insert through back of Headboard into Bracket on Bed Frame. Place
Flat Washer (B) followed by Lock Washer (C) then Nut (D) onto Bolt and use Wrench (E)
and Allen Wrench (F) to securely and firmly tighten Bed Frame to Headboard. Repeat for
process for all remaining holes. If frame does not align with pre-drilled holes in Head-
board, consider using a *Modification Plate, commonly called a Modi Plate (not
included). These are available by searching on-line or a local retailer.
*Recommended Bed Frame:
Leggett and Platt K45G/K45R - Queen/King/California King
Modi Plate
(Not Included)
*