Batca X4 User manual

www.batcafitness.com X4 Owner’s Manual
X4
Owner’s Manual
Record Serial Number Here
Batca Fitness Systems
Tel. [phone]
www.batcafitness.com
Date of Purchase
October 2008
Revision 3

Batca Fitness Systems 2 X4 Owner’s Manual
Page
Instructions 2
Parts Listing 3-5
Hardware Comparison 6-9
Cable Comparison 10
Main Frame Assembly 11-14
Shoulder Press and Bicep Curl Station 15-17
Mid Row Station 18
Pec and Chest Station 19-24
Leg Extension and Leg Curl 25-29
Cable Routing 30-38
Page
Weight Stack Decals 39
Upholstery 39-41
Weight Stack Enclosures, Bars, Straps 39-40
Leg Press Option 42-44
Leg Press Cable Routing 45
Cable Tension and Adjustment 46-47
Final Assembly and Troubleshooting 48-49
Maintenance 50
Warranty 51
Layout 52
Table of Contents
Congratulations on the purchase of your new Batca X4. This gym will provide you with a lifetime of enjoyment to meet your
strength training needs. Batca Fitness Systems strives to build the best quality multi-station gyms and to package these gyms in such
a way to avoid any damage during shipping.
In order to get started with your assembly you should first familiarize yourself with this manual. It is recommended that you
read through each step thoroughly before you begin. Begin by opening your boxes and separating all of your parts. Verify that all
parts are accounted for and have no damage. When all parts are accounted for, you may begin your assembly. Some items may
have been pre-assembled for your convenience. Please note that hardware quantities shown reflect total quantities for your gym and
may not reflect actual quantities in each bag. Assemble your gym on a solid level surface. This will ensure the best possible perform-
ance, function, and safety for the gym and your workout.
Assemble your gym according to the step by step instructions found in this manual. Failure to do so will void your warranty
and may result in personal injury. After assembly, you should check each station to ensure correct operation. If a problem arises,
recheck your assembly with these instructions to verify correct assembly. If you are unable to correct a problem or have questions
with your assembly please contact your authorized Batca dealer.
Batca Fitness Systems has built this gym to give you a safe, effective and enjoyable workout. However,
there is a risk assumed by individuals who use this type of equipment. It is very important that all warnings and
instructions are read and followed before beginning any exercise program.
It is also very important to read and follow the preventative maintenance schedule described in this
manual. If any of the warning labels or stickers are worn, faded, torn, scratched or missing they should be replaced
immediately.
WARNING:There is a risk assumed by individuals who use this type of equipment. To minimize risk
always follow these rules.
1) It is essential that you consult with your physician before beginning any exercise program.
2) Inspect equipment before each use for loose, worn, or frayed parts (including cables, nuts and bolts). Replace
parts at first signs of wear (use only genuine BATCA replacement parts). Use of equipment that is damaged,
worn, frayed or not completely assembled on a solid, level surface may result in injury.
3) Make sure all adjustment pins are fully engaged before using equipment.
4) Keep all parts of the body and clothing outside the path of any moving parts of the gym. Be alert to the
possibility of injury. Do not be careless.
5) Minors and children should not be allowed to play on or around this gym.
6) If you have any questions on proper use or maintenance of this gym, do not hesitate to call your local BATCA
FITNESS SYSTEMS distributor or BATCA FITNESS SYSTEMS at [phone]. www.batcafitness.com
Instructions
Warning

www.batcafitness.com 3 X4 Owner’s Manual
Main Frame Components
Accessories Upholstery
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 BFM-10300 Center Hub 1
2 BFM-10316 Chest Base 1
3 BFM-10319 Low Row 1
4 BFM-10309 Shoulder Base 1
5 BFM-10308 Mid Row Base 1
6 BFM-10306 Leg Ext/Curl Base 1
8 BFM-10121 Low Row Diamond Plate 2
9 BFM-10112 Chest Pole 1
10 BFM-10305 Leg Ext/Curl Pole 1
11 BFM-10307 Shoulder Pole 1
12 BFM-10317 Mid Row Pole 1
13 BFM-10311 Mid Row Top 1
14 BFM-10312 Leg Ext/Curl Top 1
15 BFM-10314 Chest/Shoulder Top 1
16 BFM-10130 Bar Catch Left 1
17 BFM-10131 Bar Catch Right 1
18 BFM-50256 10lb Weight Plate 76
19 BFM-10299 10lb Top Plate 4
20 BFM-50258 Weight Stack Shaft 4
21 BFM-50260 Guide Rod 8
22 BFM-10318 Bicep Main Frame 1
23 BFM-10310 Shoulder Bicep Seat 1
24 BFM-10324 Chrome Pad Adjustment 1
25 BFM-10326 Chrome Pad Adjustment 1
26 BFM-10105 Shoulder Arm 1
27 BFM-50247 5/8” Spacer 2
28 BFM-10315 Bicep Curl Arm 1
29 BFM-10320 Bicep Handle Bar 1
30 BFL-50115 Bent Plate 4
31 BFM-50240 Handle 4
32 BFM-50450 Axle 2
33 BFM-50261 Axle 6
34 BFM-10322 Back Adjustment 1
35 BFM-10323 Mid Row Arm 1
36 BFM-10325 Chrome Pad Adjustment 1
37 BFM-10153 Chrome Pad Adjustment 1
38 BFM-10126 Pec Top 1
39 BFL-50127 Pec Pulley Holder 1
40 BFM-10125 Upper Pec Arm Right 1
41 BFM-10124 Upper Pec Arm Left 1
42 BFM-10148 Pec Cam Right 1
BOX
1
1
2
1
1
1
2
1
1
1
1
1
1
1
4
4
N/A
N/A
N/A
5
3
3
3
3
3
4
3
3
N/A
N/A
N/A
N/A
4
4
4
1
4
4
4
4
4
7 BFM-50170 Anti-Deflection Plate 1 2
ITEM NO. PART NUMBER DESCRIPTION QTY. BOX
43 BFM-10147 Pec Cam Left 1 4
44 BFM-10103 Lower Pec Arm 2 4
45 BFM-10101 Chest Pivot 1 4
46 BFM-50246 Spacer 3/16" 2 4
47 BFM-10132 Foot Assist 1 4
49 BFM-10138 Chest Press Arm 1 4
50 BFM-10146 Chest Press Pulley Holder 1 4
51 BFM-10110 Chrome Pad Adjustment 1 1
52 BFM-10128 Elbow Support 1 2
53 BFM-10136 Knee Hold Down Elbow 1 2
54 BFM-50186 Anti-Deflection Plate 1 4
55 BFM-10304 Leg Ext/Curl Pillow Holder 1 2
56 BFM-10144 Leg Ext/Curl Cam 1 2
57 BFM-10139 Leg Ext/Curl Pivot Arm 1 2
58 BFM-10145 Two Pulley Feeder 1 4
59 BFM-50267 Counter Weight 1 2
60 BFM-10135 High Pivot Roller 1 2
61 BFM-10151 Low Pivot Roller 1 2
62 BFM-10301 Ab Pole 1 2
63 BFM-10302 Leg Ext/Curl Seat 1 2
64 BFM-10303 Leg Ext/Curl Side Frame 1 2
65 BFM-10141 Knee Alignment Roller 1 2
66 BFM-50222 Axle 1 N/A
67 BFM-10115 Left Handle 1 2
68 BFM-10116 Right Handle 1 2
69 BFM-10327 Chrome Pad Adjustment 1 2
70 BFM-10321 Back Adjustment 1 2
71 BFM-10133 Free Floater 4 4
72 BFM-50345 Pulley Cover 4 4
73 BFM-50444 Weight Stack Enclosures 2 5
74 BFM-50455 Weight Stack Enclosures w/ Logo 2 5
76 BFM-10137 Foot Shroud 1 4
77 BFM-50244 Round Tube 1 4
86 BFM-50316 Anti-Deflection Plate 1 4
87 BFM-50248 Spacer 7/8" 2 4
88 BFM-50432 Bottom 2” Shroud Spacer 8 3
89 BFM-50431 Top 2 1/4” Shroud Spacer 8 3
90 BFM-10415 Guide Rod Holder 4 4
177 BFM-10348 5lb Top Plate 4* N/A
178 BFM-50504 5lb Weight Plate 16* N/A
186 BFM-50651 Cable Guard Spacer 1 3
ITEM NO. PART NUMBER DESCRIPTION QTY.
112 BFC-10101 1 inch Chain 1
113 BFC-10102 12 inch Chain 1
114 BFC-50122 Ab Strap 1
115 BFC-50125 Lat Bar 1
116 BFC-50126 Short Bar 1
117 BFC-50127 Magnetic Weight Stack Pin 4
BOX
3
3
4
1
4
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
103 BFU-10107 Bicep Arm Pad 2
104 BFU-10117 Large Bottom Pad 3
105 BFU-10118 Bottom Pad 1
106 BFU-10119 Head Pad 1
107 BFU-10120 Back Pad With Lumbar 3
108 BFU-10121 7" Upholstery Roller 4
109 BFU-10122 Large Upholstery Roller 2
110 BFU-10123 Bicep Chest Pad 1
111 BFU-10124 Mid Row Chest Pad 1
BOX
1
1
1
1
1
4
4
1
1

Batca Fitness Systems 4 X4 Owner’s Manual
Hardware
Cables
ITEM NO. PART NUMBER DESCRIPTION QTY.
48 CAB-10401 Foot Assist Cable 2
92 CAB-10106 Pec Cam to Pec Cam Cable 1
93 CAB-10125 Weight Stack to Free Floater Cable 1
94 CAB-10126 Lat Pull to Weight Stack Cable (no LP) 2
95 CAB-10127 Lat Pull to Weight Stack Cable (w/ LP) 1
96 CAB-10128 Ab to Weight Stack Cable 1
97 CAB-10129 Leg Ext/Curl Cam to Free Floater Cable 1
98 CAB-10130 Bicep Curl to Low Pulley Cable 1
99 CAB-10131 Weight Stack to Free Floater Cable 1
100 CAB-11007 Free Floater to Chest Lockout Cable 1
BOX
4
4
4
4
4
4
4
4
4
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
118 BFH-50112 Screw Cap Cover 8
119 BFH-50113 Screw Cap Washer 8
120 BFH-50118 HCS 3/8"-16 X 1" P5 2
121 BFH-50119 HCS 3/8"-16 X 1 1/4" P5 12
122 BFH-50120 HCS 3/8"-16 1 1/2" P5 8
123 BFH-50121 HCS 3/8"-16 X 2" P5 10
124 BFH-50122 HCS 3/8"-16 X 2 1/4" P5 12
125 BFH-50124 HCS 3/8"-16 X 2 3/4" P5 26
126 BFH-50125 HCS 3/8"-16 X 3" P5 48
127 BFH-50126 HCS 3/8"-16 X 3 1/4" P5 43
128 BFH-50127 HCS 3/8"-16 X 3 1/2" P5 4
129 BFH-50128 HCS 3/8”-16 x 3 3/4” P5 6
130 BFH-50129 HCS 3/8"-16 X 4" P5 9
131 BFH-50130 HCS 3/8"-16 X 4 1/4" P5 5
132 BFH-50133 HCS 3/8"-16 X 6 1/2" P5 2
134 BFH-50137 HCS 1/2"-13 X 3 1/4" P5 4
134 BFH-50137 HCS 1/2"-13 X 3 1/4" (5/8" Threads) 1
137 BFH-50146 3/8" Flat Washer (Black) 282
138 BFH-50147 3/8" Lock Washer (Black) 42
139 BFH-50149 3/8"-16 Jam Nut (Zinc) 8
140 BFH-50155 1/2"-13 Nylock (Black) 5
141 BFH-50157 3/8"-16 Nylock (Black) 144
142 BFH-50171 Side Mounted Flange Bearing 4
143 BFH-50172 Pillow Block Bearing 2
144 BFH-50173 3 1/2" Pulley 5
145 BFH-50174 4 1/2" Pulley 33
146 BFH-50188 Snap Hook 4
147 BFH-50190 Rubber Donut 8
148 BFH-50192 Weight Stack Decals 4
149 BFH-50197 Small Logo 2
150 BFH-50198 Large Logo 2
ITEM NO. PART NUMBER DESCRIPTION QTY.
151 BFH-50201 1/2" Pulley Spacer 40
152 BFH-50202 3/4" Pulley Spacer 4
153 BFH-50210 Gas Spring 3
154 BFH-50220 Threaded Collar 4
155 BFH-50221 3" Plastic Washer 10
156 BFH-50222 Rubber Bumper 2
157 BFH-50234 6 1/2” Spring 2
159 BFH-50236 Foam Grip 4
160 BFH-50238 Pin 2
161 BFH-50239 Snap Ring 2
162 BFH-50242 3/8 Fender Washer 4
163 BFH-50245 FHSCS 5/16"-18 X 1" 2
164 BFH-50246 Anti-Skid Material 5
165 BFH-50247 3/8"-16 Thin Nylock (Zinc) 4
167 BFH-50250 1 1/4" Shoulder Bolt 4
168 BFH-50251 1/2" Flat Washer (Black) 10
169 BFH-50252 Plastic Collar 6
170 BFH-50253 Beveled Leveler 4
171 BFH-50257 Warning Label 4
173 BFH-50269 Warning Decal (Do Not Hang) 1
174 BFH-50274 HCS 3/8"-16 X 4 3/4" P5 1
175 BFH-50275 X4 Exercise Chart 1
176 BFH-50288 3/8"-16 Nylock (Zinc) 4
179 BFH-50200 Rubber Bumper 2
180 BFH-50256 1/2" Jam Nut (Zinc) 8
181 BFH-50227 Cable Strap 3
182 BFH-50267 5/16"-18 Nylock 4
183 BFH-50192 200lb Weight Stack Decals 4
184 BFH-50258 175lb Weight Stack Decals 4
185 BFH-50298 HCS 3/8"-16 x 8 3/4" P5 2

www.batcafitness.com 5 X4 Owner’s Manual
Leg Press Components
Tools Required
• 7/16” Wrench
• 1/2” Wrench
• 9/16” Wrench
• 3/4” Wrench
• 9/16” Ratchet
• 3/4” Ratchet
• Allen Wrench Set
• Tape Measure
Leg Press Hardware
Upholstery
Cables
ITEM NO. PART NUMBER DESCRIPTION QTY.
7 BFM-50316 Anti-Deflection Plate 1
27 BFM-50247 5/8” Spacer 2
78 BFM-10313 Leg Press Frame 1
79 BFM-10140 Leg Press Pivot 1
80 BFM-10152 Bushing Holder 2
81 BFM-50252 Four Bar 2
82 BFM-10102 Foot Plate Pivot 1
83 BFM-10106 Chrome Pad Adjustment 1
84 BFL-50128 Foot Plate 1
85 BFM-50270 Handle 1
91 BFM-10432 Spacer Tube 2
67 BFM-10115 Left Handle 1
68 BFM-10116 Right Handle 1
71 BFM-10133 Free Floater 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
101 CAB-11010 Leg Press Lockout to Free Floater Cable 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
104 BFU-10117 Large Bottom Pad 1
107 BFU-10120 Back Pad With Lumbar 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
143 BFH-50172 Pillow Block Bearing 2
145 BFH-50174 4 1/2" Pulley 6
151 BFH-50201 1/2" Pulley Spacer 8
166 BFH-50249 1/2" Shoulder Bolt (3/8"-16 x 50mm) 4
167 BFH-50250 1 1/4" Shoulder Bolt 1
168 BFH-50251 1/2" Flat Washer (Black) 4
170 BFH-50253 Beveled Leveler 1
180 BFH-50256 1/2" Jam Nut (Zinc) 1
182 BFH-50267 5/16"-18 Nylock 1
141 BFH-50157 3/8”-16 Nylock (Black) 23
ITEM NO. PART NUMBER DESCRIPTION QTY.
121 BFH-50119 HCS 3/8"-16 X 1 1/4" P5 2
124 BFH-50122 HCS 3/8"-16 X 2 1/4" P5 2
125 BFH-50124 HCS 3/8"-16 X 2 3/4" P5 4
126 BFH-50125 HCS 3/8"-16 X 3" P5 6
127 BFH-50126 HCS 3/8"-16 X 3 1/4" P5 4
135 BFH-50144 FHSCS 3/8"-16 X 1" 2
136 BFH-50145 FHSCS 3/8"-16 X 2 1/4" 3
137 BFH-50146 3/8" Flat Washer (Black) 37
138 BFH-50147 3/8" Lock Washer (Black) 4
139 BFH-50149 3/8”-16 Jam Nut (Zinc) 1
123 BFH-50121 HCS 3/8”-16 X 2” P5 1

Batca Fitness Systems 6 X4 Owner’s Manual
Bolt Length Note: Bolt length is measured from
the underside of the head of the bolt.

www.batcafitness.com 7 X4 Owner’s Manual

Batca Fitness Systems 8 X4 Owner’s Manual

www.batcafitness.com 9 X4 Owner’s Manual

Batca Fitness Systems 10 X4 Owner’s Manual
Cables
Cable Comparison Chart
ITEM NO. PART NUMBER DESCRIPTION QTY.
48 CAB-10401 Foot Assist Cable 2
92 CAB-10106 Pec Cam to Pec Cam Cable 1
93 CAB-10125 Weight Stack to Free Floater Cable 1
94 CAB-10126 Lat Pull to Weight Stack Cable (no LP) 2
95 CAB-10127 Lat Pull to Weight Stack Cable (w/ LP) 1
96 CAB-10128 Ab to Weight Stack Cable 1
97 CAB-10129 Leg Ext/Curl Cam to Free Floater Cable 1
98 CAB-10130 Bicep Curl to Low Pulley Cable 1
99 CAB-10131 Weight Stack to Free Floater Cable 1
100 CAB-11007 Free Floater to Chest Lockout Cable 1
101 CAB-11010 Leg Press Lockout to Free Floater Cable 1

www.batcafitness.com 11 X4 Owner’s Manual
Step 1:
• Set the Chest Base in a location close to the gym’s final position. (See Layout Diagram on the back cover of this
manual). Keep in mind that you should allow at least 18”-24” as working room around the unit.
• Record your serial number on the front of this assembly instructions and keep for your records. The serial number
can be found on the back side of the Leg Ext/Curl Base, as seen below in Figure 1A.
Note: For a more consistent appearance, position all bolts in the direction shown in each figure.
• Hand Tighten all hardware for Steps 1-3.
Figure 1
Figure 1A
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
PLEASE FOLLOW ALL DIRECTIONS VERY CAREFULLY FOR PROPER
INSTALLATION.
Item # Part # Description Qty
1 BFM-10300 Center Hub 1
2 BFM-10316 Chest Base 1
3 BFM-10319 Low Row 1
4 BFM-10309 Shoulder Base 1
5 BFM-10308 Mid Row Base 1
6 BFM-10306 Leg Ext/Curl Base 1
86 BFM-50316 Anti-Deflection Plate 1
126 BFH-50125 HCS 3/8"-16 x 3" P5 8
127 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 2
137 BFH-50146 3/8" Flat Washer (Black) 20
141 BFH-50157 3/8"-16 Nylock (Black) 10

Batca Fitness Systems 12 X4 Owner’s Manual
Step 2:
Figure 2
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Item # Part # Description Qty
9 BFM-10112 Chest Pole 1
10 BFM-10305 Leg Ext/Curl Pole 1
11 BFM-10307 Shoulder Pole 1
12 BFM-10317 Mid Row Pole 1
127 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 8
137 BFH-50146 3/8" Flat Washer (Black) 16
139 BFH-50149 3/8"-16 Jam Nut (Zinc) 2
141 BFH-50157 3/8"-16 Nylock (Black) 8
170 BFH-50253 Beveled Leveler 2

www.batcafitness.com 13 X4 Owner’s Manual
Figure 3
Figure 4
Step 3:
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Step 4:
• Snug Tighten all loose hardware.
• Align the Chest Pole, the Leg Ext/Curl Pole, the Mid-Row Pole, and the Shoulder Pole so that they each are plumb
and standing up vertically as shown in Figure 4.
• Wrench Tighten all hardware thus far as found in Steps 1-3, starting from the top of the gym and working to the
bottom.
Item # Part # Description Qty
13 BFM-10311 Mid Row Top 1
14 BFM-10312 Leg Ext/Curl Top 1
15 BFM-10314 Chest/Shoulder Top 1
16 BFM-10130 Bar Catch Left 1
17 BFM-10131 Bar Catch Right 1
127 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 11
130 BFH-50129 HCS 3/8"-16 x 4" P5 4
137 BFH-50146 3/8" Flat Washer (Black) 30
141 BFH-50157 3/8"-16 Nylock (Black) 15

Batca Fitness Systems 14 X4 Owner’s Manual
Step 5:
Figure 5
Figure 5A
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Item # Part # Description Qty
18 BFM-50256 10lb Weight Plate 76
19 BFM-10299 10lb Top Plate 4
20 BFM-50258 Weight Stack Shaft 4
21 BFM-50260 Guide Rod 8
90 BFM-10415 Guide Rod Holder 4
117 BFC-50127 Magnetic Weight Stack Pin 4
126 BFH-50125 HCS 3/8"-16 x 3" P5 8
137 BFH-50146 3/8" Flat Washer Black 16
141 BFH-50157 3/8"-16 Nylock (Black) 8
147 BFH-50190 Rubber Donut 8
177 BFM-10348 5lb Top Plate 4*
178 BFM-50504 5lb Weight Plate 16*
*Optional Medical Weight Stack
Note: Turn all Top Plates so that the
additional hole for the Weight Stack Pin
is positioned on the right of the center
hole. This will allow you to put the
Weight Stack Numbers on the left side
without covering the hole.

www.batcafitness.com 15 X4 Owner’s Manual
Step 6:
Figure 6
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Item # Part # Description Qty
22 BFM-10318 Bicep Main Frame 1
23 BFM-10310 Shoulder/Bicep Seat 1
24 BFM-10324 Chrome Pad Adjustment 1
25 BFM-10326 Chrome Pad Adjustment 1
123 BFH-50121 HCS 3/8"-16 x 2" P5 1
127 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 6
137 BFH-50146 3/8" Flat Washer (Black) 18
141 BFH-50157 3/8"-16 Nylock (Black) 10
153 BFH-50210 Gas Spring 1
174 BFH-50274 HCS 3/8"-16 x 4 3/4" P5 1
125 BFH-50124 HCS 3/8” x 2 3/4” P5 2

Batca Fitness Systems 16 X4 Owner’s Manual
Black plastic spacers
center arm inside bearings.
Figure 7B
Step 7:
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Figure 7
Item # Part # Description Qty
26 BFM-10105 Shoulder Arm 1
27 BFM-50247 5/8" Spacer 2
129 BFH-50128 HCS 3/8"-16 x 3 3/4" P5 2
137 BFH-50146 3/8" Flat Washer Black 4
141 BFH-50157 3/8"-16 Nylock (Black) 2

www.batcafitness.com 17 X4 Owner’s Manual
Step 8:
Figure 8
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Item # Part # Description Qty
28 BFM-10315 Bicep Curl Arm 1
29 BFM-10320 Bicep Handle Bar 1
30 BFL-50115 Bent Plate 1
31 BFM-50240 Handle 2
32 BFM-50450 Axle (in handle) 2
33 BFM-50261 Axle (in pivot) 2
119 BFH-50113 Screw Cap Washer 4
126 BFH-50125 HCS 3/8"-16 x 3" P5 2
131 BFH-50130 HCS 3/8"-16 x 4 1/4" P5 2
132 BFH-50133 HCS 3/8"-16 x 6 1/2" P5 2
137 BFH-50146 3/8" Flat Washer Black 8
141 BFH-50157 3/8"-16 Nylock (Black) 4
159 BFH-50236 Foam Grip 2
162 BFH-50242 3/8" Fender Washer 2
165 BFH-50247 3/8" Thin Nylock 2
118 BFH-50112 Screw Cap Cover 4

Batca Fitness Systems 18 X4 Owner’s Manual
Step 9:
Figure 9
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Figure 9A
Item # Part # Description Qty
27 BFM-50247 5/8" Spacer 2
34 BFM-10322 Back Adjustment 1
35 BFM-10323 Mid Row Arm 1
36 BFM-10325 Chrome Pad Adjustment 1
37 BFM-10153 Chrome Pad Adjustment 1
123 BFH-50121 HCS 3/8"-16 x 2" P5 1
125 BFH-50124 HCS 3/8"-16 x 2 3/4" P5 1
126 BFH-50125 HCS 3/8"-16 x 3" P5 2
129 BFH-50128 HCS 3/8"-16 x 3 3/4" P5 2
137 BFH-50146 3/8" Flat Washer Black 10
141 BFH-50157 3/8"-16 Nylock (Black) 6
142 BFH-50171 Side Mounted Flange Bearings 2
153 BFH-50210 Gas Spring 1

www.batcafitness.com 19 X4 Owner’s Manual
Figure 10
All Flat Washers and Nylocks are 3/8" unless otherwise noted.
Figure 11
Step 11:
Step 10:
Note: The Pec Pulley Holder can very easily be put on upside down. Note that the notch represents the top, as
shown in Figure 10A.
Figure 10A
Item # Part # Description Qty
40 BFM-10125 Upper Pec Arm Right 1
41 BFM-10124 Upper Pec Arm Left 1
42 BFM-10148 Pec Cam Right 1
43 BFM-10147 Pec Cam Left 1
154 BFH-50220 Threaded Collar 2
Item # Part # Description Qty
38 BFM-10126 Pec Top 1
39 BFL-50127 Pec Pulley Holder 1
127 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 2
130 BFH-50129 HCS 3/8"-16 x 4" P5 1
131 BFH-50130 HCS 3/8"-16 x 4 1/4" P5 1
137 BFH-50146 3/8" Flat Washer (Black) 8
141 BFH-50157 3/8"-16 Nylock (Black) 4

Batca Fitness Systems 20 X4 Owner’s Manual
Note: Rubber Bumper should be on
inside and face towards the Upper
Pec Arms.
Figure 12A
Step 12:
Figure 12
Item # Part # Description Qty
33 BFM-50261 Axle 4
44 BFM-10103 Lower Pec Arm 2
131 BFH-50130 HCS 3/8"-16 x 4 1/4" P5 2
137 BFH-50146 3/8" Flat Washer Black 4
141 BFH-50157 3/8"-16 Nylock (Black) 2
179 BFH-50200 Rubber Bumper 2
All Flat Washers and Nylocks are 3/8" unless otherwise noted.