Baxtran STI User manual

V.2.2
18/10/2018
EN
USER MANUAL
STI
| marca propiedad de | est une marque de | trade mark propiety of | ist als Marke des Markeneigentums zu kennzeichnen
|marchio proprietà di
Pol. Empordà Internacional Calle F. Parcela 15-16
17469 VILAMALLA - (Girona) SPAIN
T. (34) 972 527 212 - F. (34) 972 527 211
El fabricante se reserva el derecho de modificar sin previo aviso las características de sus productos para introducir mejoras técnicas o cumplir con nuevas regulaciones oficiales./Le
constructeur se réserve le droit de modifier les caractéristiques de ses produits en vue d’y apporter des améliorations techniques ou de respecter de nouvelles réglamentations./The
manufacturer reserves the right to modify the specifications of its products in order to make technical improvements or comply with new regulations/ Der Hersteller behält sich das Recht vor,
ohne Vorankündigung die Eigenschaften seiner Produkte zu ändern, um weitere Verbesserungen zu erzielen oder neuen offiziellen Richtlinien nachzukommen/ Il fabbricante si riserva il diritto
di modificare senza alcun preavviso le caratteristiche dei suoi prodotti in vista di apportare migliorie tecniche o di rispettare nuove regolamentazioni.

ENUSER MANUAL STI
2
EN
CONTENTS
1. PRECAUTIONS 4
2. INTRODUCTION 5
2.1 COMPONENTS 5
3. SPECIFICATIONS 5
3.1 GENERAL SPECIFICATIONS 5
3.2 PRINTER SPECIFICATIONS 6
3.3 OVERALL VIEW 6
3.4 CONNECTORS 7
3.5 DIMENSIONS 7
4. INSTALLATION 8
5. KEY BOARD & DISPLAY 9
6. OPERATION 11
6.1 POWER ON/OFF 11
6.2 ZERO 11
6.3 TARE 12
6.4 SAMPLE WEIGHING 12
6.5 SELECT UNIT 12
6.6 PLU SETTINGS 13
6.6.1 USING DIRECT PLU 13
6.6.2 USING INDIRECT PLU 15
6.7 BACK LIGHT 17
6.8 AUTOMATIC UNIT PRICE CLEAR 17
6.9 ACUMULATION 17
6.10 GIVE CHANGES 18
6.11 SALES REPORT 19
6.12 PAPER ROLL INSTALLATION 20
7. PARAMETERS 21
7.1 PARAMETER SETTINGS 21
7.2 PARAMETER MENU 22
8. CALIBRATION 24
9. RS 232 OUTPUT 24
10. PRINT FORMAT 27
11. ERROR CODES 28
12. DRAWING 30
13. DOWNLOAD SOFTWARE 31

3
ENUSER MANUAL STI

ENUSER MANUAL STI
4
1. PRECAUTIONS
WARNING
DISCONNECT ALL POWER TO THIS UNIT BEFORE
INSTALLING, CLEANING, OR SERVICING. FAILURE TO
DO SO COULD RESULT IN BODILY HARM OR DAMAGE
THE UNIT.
CAUTION
• PERMIT ONLY QUALIFIED PERSONS TO SERVICE THE INSTRUMENT
• BEFORE CONNECTING OR DISCONNECTING ANY COMPONENTS, REMOVE THE POWER.
• FAILURE TO OBSERVE THESE PRECAUTIONS BODILY HARM OR DAMAGE TO OR DESTRUCTION
OF THE EQUIPMENT.
• The price computing scale is a precision electronic instrument, handle it carefully.
• Do not install the scale in direct sunlight.
• Verify the local voltage and receptacle type are correct for the scale.
• Only use original adaptor, other could cause damage to the scale.
• Pluggable equipment must be installed near an easily accessible socket outlet.
• Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
• Avoid sudden temperature changes, vibration, wind and water.
• Avoid heavy RF noise.
• keep the scale clean

5
ENUSER MANUAL STI
2. INTRODUCTION
2.1. COMPONENTS
STI series of economic price computing scales are very compact, reliable high accuracy and much stable
It uses 18mm/9.5mm LCD display with white LED back light
Accumulation, weighing unit conversion and change function
33 membrane keyboard
8 direct PLUs and 100 indirect PLUs, supported alphanumeric PLU information
4 direct keys for vendors
Auto unit price clear operation
With back office software to manage product information and sale report
AC Adaptor / Rechargeable battery
Built-in 58mm thermal receipt printer, easy to load paper
3. SPECIFICATIONS
3.1. GENERAL SPECIFICATIONS
MODEL LPP
Display Front and Pole: 18mm/9.5mm LCD Display
LED back Light
Capacity 6g 15g 30g
Readability 2g 5g 10g
Max. Divisions 3000e
Weighing Units kg / 100g
Pan size 240x370mm
Housing ABS Plastic and stainless steel pan
Communication Interface RS232; RJ11 as standard port.
Operation Temperature -10°C -+ 40°C
Stability Time 1 Seconds typical
Power AC Adaptor 12V/2500mA.
standard rechargeable Battery 6V/4Ah
Keypad 33 membrane keys
ADC Sigma delta
Internal counts 600,000
Gross Weight 7kg

ENUSER MANUAL STI
6
3.2 PRINTER SPECIFICATIONS
Printing Method Thermal dot line printing
Number of dots/line 384
Dots density 8
Printing width (mm) 48 (centered on paper)
Paper width (mm) 57
Paper roll size (mm) 50
Printing Resolution 203DPI
Printer Head Life 50kilometer
Printer Speed 90mm/second
3.3. OVERALL VIEW
Client display
Pole
SST Pan
Level bubble
Printer
Keyboard
Display
Calibration switch
Adjustable foot
Adaptor jack

7
ENUSER MANUAL STI
3.4. CONNECTORS
No Interface Description Spec
1 RS 232 For computer, ECR or TPuP printer Standard
2 RJ11 Support Cash drawer(6V) Standard
3.5 DIMENSIONS
1 2

ENUSER MANUAL STI
8
4. INSTALLATION
UNPACKING
Carefully take the scale out of its package, make it sure its not damaged and all accessories are included.
Accessories:
1. Scale
2. Adaptor
3. Stainless steel pan
4. Product manual
Keep the packaging material for your future use.
LEVEL ADJUSTING
Place the scale on a table.
Check the water mark. If bubble is not centre, adjust the leveling feet until reach centre. Check the level when you change the
location.
CONECT ADAPTOR
• To charge the battery insert the adaptor pin to jack. Adaptor simply plug into the mains power.
The scale no needs to be turned on.
• The battery should be charged for 4 hours for full capacity.
• The symbol status of the battery
Battery voltage has dropped
Fully charged
• Do not use any other type of power adaptor than the one supplied with the scale.
• Verify that the AC power socket outlet is properly protected
INSTALLATION
• Place the scale on a table.
• Insert the pole into the bottom bracket.
• Close the bottom cover by using screws
• Carefully place the pan to the four holes on the top cover
• Adjust the water mark bubble level.
• Connect the adaptor pin to the adaptor jack.
Adaptor jack is locating below the right side of the scale.

9
ENUSER MANUAL STI
• Adaptor connects into your AC power socket.
Pluggable equipment must be installed near an easily accessible socket outlet with a protective ground/ earth contact.
• Turn on the power switch. If you want to turn off, press again the switch backward.
• Display will be show the scale capacity and will be starting self checking.
• After self checking, display will be come to normal weighing mode.
• Then you can start your operation.
Note: Initial Start Up.
Warm-up time of 15 minutes stabilizes the measured values after switching on.
5. KEYBOARD DISPLAY
PANTONE 7541
STI
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
KEYS PRESS THIS KEY TO
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( )
CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
to
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEF
ABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Numeric Keys, enter unit price / PLU and enter alphabetic
characters in the corresponding menus.
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( )
CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Clear incorrect entries and error conditions.
By keeping it pressed allows us to erase all records.
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Returns the display to zero.In parameter settings,to escape from the menu.
By long pressing enter to amount operation.
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Subtracts the tare values, change to gross to net mode and enter parameter settings.
By keeping it pressed allows us to enter a pre-tare.

ENUSER MANUAL STI
10
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Enter to auto clear mode.
By keeping it pressed allows us enter in the report print.
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
- Used for store or recall PLU information. (Long Touch)
- Used for select indirect PLUS (One Touch)
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Used for give change operations. (First we must select the vendor).
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Management of accounts in process.
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
- Used for change unit (kg/100g)
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
- Used for set back light (Long touch)
- Used for take a ticket copy (One Touch)
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Used for switch on/off the scale
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Decimal point
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2
P1
P2 P3 P4
V3 V4 P5 P6 P7 P8
to
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7
P8 8 direct PLU,used for store or recall PLU information
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1
V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
to
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3
V4
P5 P6 P7 P8
4 direct keys for select vendor.
KEYS IN THE PARAMETER SETTINGS
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
To enter into the function and parameter settings
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNO
GHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
to
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNO
GHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Scroll to function or parameter
PANTONE 7541
STI
B/L
COPY
MEM
PLU
U
SAVE
T
M+
TOTAL
MR
JKL
DEFABC
PQRS
_( ) CLEAR
RECORDS
WXYZTUV
MNOGHI
CE
3
6
9
7 8
4
1
0
2
5
STI
100 g
kg
V1
V2
V4
V3
SAVE
T
V1 V2 P1 P2 P3 P4
V3 V4 P5 P6 P7 P8
Returns the display to zero.In parameter settings,to escape from the menu.