Bayco 2134 User manual

Operating Instructions for
Model 2134 Work Light
Rechargeable Floodlight - Spotlight
INS-2134-15
CAUTION: Do not use this work light in explosive atmospheres, near flammable liquids,
or where explosion-proof lamps are required. Do not immerse in water.
CAUTION: For light duty work only.
Thank you for purchasing this Bayco work light. Save these instructions.
Please read these instructions before using your work light. Be sure to charge the work
light before the first use.
CHARGING
Initial Use
Fully charge the work light before the first use. If the battery is new or has been unused
for several months, several charge and discharge cycles may be needed to reach full
battery capacity. To reach maximum performance, run the light to completely discharge
the battery and then recharge. Each charge cycle will extend the operation time until
maximum capacity is achieved. The charge time for maximum capacity is approximately
8 hours.
Regular Use
Use only the supplied AC charging adapter.
For best performance, charge the work light when the LED’s start to dim.
Connect the AC power adapter to the light. The red indicator will light.
The red light indicates the work light is being charged. The red light remains on until
the battery is fully charged. At full charge, the light turns off. The total time to full
charge varies depending on the remaining charge in the battery pack.
Keep the work light plugged into the charger to maintain a trickle charge.
SAFETY
CAUTION BRIGHT LED RADIATION: AVOID DIRECT EYE EXPOSURE. The light is a
Class 2 LED product per IEC 60825-1 Edition 1.2.2001.
Do not use or charge this work light in explosive or hazardous areas.
Do not attempt to repair or disassemble the work light or the charger power supply.
Use only the supplied AC charger.
TIPS TO EXTEND BATTERY LIFE
The work light NiMH internal battery pack does not have a memory effect. Charging the
work light often helps extend its useful life.
A new work light or one that has not been used for a long period of time may not
accept a full charge initially. This is normal and does not indicate a problem. Fully
discharge and then charge the unit several times to condition the battery pack for full
capacity. As the battery pack capacity increases the charge time shortens.
Charge the unit after each use, whether the work light is fully discharged or not.
Store the work light at room temperature
OPERATION FOR 2134
The work light has a 2 position rocker switch to activate either the floodlight or spotlight.
The center position turns the light off. The magnetic hook can be placed on the top of the
light or the side.
WARRANTY
PRODUCTS COVERED UNDER THIS LIMITED WARRANTY:
This product is warranted to the original purchaser for 1 year and only covers failures due
to defects in materials or workmanship. If this product is used for rental purposes, the
warranty term is reduced to 90 days from the date of purchase.
NOT COVERED
The warranty does not cover normal wear and tear or cosmetic damage. The Limited
Warranty also does not cover damages which occurred in shipment or failures which are
caused by accidents, misuse, abuse, faulty installation and lightning damage.
Consequential damages, incidental damages or incidental expenses, including damage
to property. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This
warranty gives you specific legal rights, which may vary from state to state. This warranty
does not apply to certain Bayco professional products that carry a specific warranty
unique to those products.
WARRANTY CLAIMS - USA
Contact Bayco for USA warranty claims. Call and Bayco Customer Service will provide
a Return Goods Authorization (RGA) to facilitate rapid warranty action. After receiving
the RGA, send the product (shipping prepaid) to BAYCO. Include a dated proof of
purchase and a brief description of the defect with your name, address and phone
number. Your product will either be repaired or replaced at the option of Bayco and
returned as soon as practical, but no later than 45 days after being received by Bayco.
WARRANTY CLAIMS - CANADA
Return the product to the place where purchased with a dated proof of purchase and a
brief description of the defect with your name, address and phone number. Your product
will either be replaced or purchase price refunded.

BAYCO PRODUCTS LIMITED 1-YEAR WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in workmanship and materials to
the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses,
electronics, switches, rechargeable batteries and chargers. Bulbs (other than LEDs) are covered for ninety
(90) days from the date of purchase. Disposable non-rechargeable batteries are excluded from this warranty.
Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and lightning
damage are also excluded.
Consequential damages, incidental damages or incidental expenses, including damage to property are
also not covered under this warranty. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you
specific legal rights, which may vary from state to state.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR
ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS
OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES
OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT PAID BY CUSTOMER.
If this product is used for rental purposes, the warranty term is reduced to 90 days from the date of
purchase.
WARRANTY CLAIMS – USA
Return the product to the place of purchase for all warranty related issues. If this is not possible, contact
Bayco Customer Service for a Return Goods Authorization (RGA). Do not return this product to Bayco without
first receiving an RGA Number from Bayco Customer Service. When returning the product, the RGA Number
must be written on the outside of the shipping box.
WARRANTY CLAIMS – OUTSIDE OF USA
Return the product to the place where purchased for all warranty related issues.
EXTENT OF COVERED WARRANTY WORK
Bayco will repair or replace this product at our option. If it is determined that the warranty is no longer in
effect, Bayco will contact you with a repair estimate before beginning any work.
WARRANTY QUESTIONS
If you have any questions about this warranty or any other Bayco product inquiries, please contact
Bayco Customer Service.

When it comes to quality work lights, Bayco is the brand you can depend on.