Bayco Nightstick NSR 2166 Series User manual

This rechargeable all LED Work Light has both a spotlight and a
oodlight built in. The spotlight, located in the base of the handle, is
rated at 32 Lumens. It’s perfect for putting a narrow beam of light into
a specic area. The oodlight, rated at 230 Lumens, is designed for
lighting up a large area. The idea is simple, use the spotlight to nd the
problem, and the oodlight to light up the area when xing the
problem. The work light has two magnets built in...one at the balance
point in the middle of the handle, and the other at the tip of the light.
The at-bottom design of the handle means the light will stand up on
most at surfaces, and the octagonal shape to the handle keeps the
oodlight aimed in the correct direction when you lay the light on its
side. Further adding to the work light’s hands-free features is the
detachable magnetic hook. It can be attached to either integrated
body magnet and rotated 360 degrees. The integrated Nickel Metal
Hydride battery can be recharged with the included AC or DC power
supply/charger.
NSR-2166R
NSR-2166B
Multi-Purpose Work Light
Rechargeable
Multi-Purpose Work Light
Rechargeable
230
3232
230 Floodlight
Lumens
Spotlight
Lumens
Floodlight
Lumens
Spotlight
Lumens
•3Hoursrun-time
•DualIntegratedMagnets&Hook
•SingleRockerSwitch
•PoweredbyintegratedNickelMetal
Hydriderechargeablebattery
•3Hoursrun-time
•DualIntegratedMagnets&Hook
•SingleRockerSwitch
•PoweredbyintegratedNickelMetal
Hydriderechargeablebattery
NSR2166seriesNSR2166series
Floodlight
Spotlight
R
E
S
I
S
T
A
N
T
W
A
T
E
R

Multi-Purpose Work Light
Rechargeable
Multi-Purpose Work Light
Rechargeable
NSR2166seriesNSR2166series
FEATURES
§Light has 60 LEDs rated at 230 lumens arranged in a floodlight pattern and
6 LEDs in the base of the handle rated at 32 lumens serving as a spotlight
§Two built-in magnets, one at the tip of the light and the other at the
mid-point of the body for hands-free use
§Magnetic hook can be attached to either of the built-in magnets and
can be rotated 360 degrees for even more hands-free versatility
§Octagonal body design keeps the light in place when laid on its side
§Flat bottom design allows the light to stand up
§Water Resistant
§Impact & chemical resistant
§Integrated Nickel Metal Hydride (NiMH) battery
§Includes both AC & DC power supply/charger
§Limited 1 Year Warranty *
INCLUDED
§Worklight with built-in dual magnets (body & tip)
§Integrated Nickel Metal Hydride battery
§Removeable hook
§AC power supply/charger
§12 V DC power supply/charger
SPECIFICATIONS
§Lumens: floodlight 230, spotlight 32
§Run-time: floodlight 3 hrs, spotlight 18 hrs
§Recharge time: 8 hrs
§Water rating: IP-X4 water resistant
§Drop rating: 2 meters
§Length: 14.3in, head diameter: 1.4in, handle diameter: 1.8in, weight: 16oz
Magnet on top with
removable hook
6 LED Spotlight Magnet on body with
removable hook Using the floodlight Using the spotlight
80362 5
80363 2
Model UPC 0 17398
NSR-2166B
NSR-2166R
*Limited 1 Year Warranty Product is warranted to be free from defects in workmanship and materials to the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses, electronics,
switches, rechargeable batteries and chargers. Disposable non-rechargeable batteries are excluded from this warranty. Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and
lightning damage are also excluded.

Please read these instructions before using your work light. Be sure to charge the
work light before the fi
rst use.
CAUTION: Do not use this work light in explosive atmospheres, near flammable
liquids, or where explosion-proof lamps are required. Do not immerse in water.
CAUTION: For light duty work only.
CHARGING
INITIAL USE
Fully charge the work light before the first use. If the battery is new or has been
unused for several months, several charge and discharge cycles may be needed to
reach full battery capacity. To reach maximum performance, run the light to completely
discharge the battery and then recharge. Each charge cycle will extend the operation
time until maximum capacity is achieved. The charge time for maximum capacity is
approximately 8 hours.
REGULAR USE
Use only the supplied AC or DC charging adapter.
For best performance, charge the work light when the LED’s start to dim.
Connect the AC power adapter to the light. The red indicator will light.
The red light indicates the work light is being charged. The red light remains on until
the battery is fully charged. At full charge, the light turns off. The total time to full charge
varies depending on the remaining charge in the battery pack.
Keep the work light plugged into the charger to maintain a trickle charge.
TIPS TO EXTEND BATTERY LIFE
The work light’s Nickel Metal Hydride internal battery does not have any recharge
memory effect. Charging the work light often helps extend its useful life.
A new work light or one that has not been used for a long period of time may not
accept a full charge initially. This is normal and does not indicate a problem. Fully
discharge and then charge the unit several times to condition the battery pack for full
capacity. As the battery pack capacity increases the charge time shortens.
Charge the unit after each use, whether the work light is fully discharged or not.
Store the work light at room temperature
Instruction Manual
Model 2166
THANK YOU FOR PURCHASING THE 2166 RECHARGEABLE WORK LIGHT.
SAVE THESE INSTRUCTIONS.
OPERATION
TURNING THE WORK LIGHT ON/OFF
The work light has a 2 position rocker switch to activate either the floodlight or
spotlight.
FLOODLIGHT
Press the Rocker Switch to the Up position to activate the fl oodlight
SPOTLIGHT
Press the Rocker Switch to the Down position to activate the spotlight
TURNING THE WORK LIGHT OFF
The center position of the Rocker Switch turns the light off
INTEGRATED MAGNETS AND MAGNETIC HOOK
The work light has two integrated magnets, one in the body of the light and the
other at the tip. These magnets will support the weight of the light when magnetically
attached to a ferrous metal surface. The removable Magnetic Hook can also be
attached to either of the integrated magnets and offers additional hands-free options.
CLEANING
Disconnect the light from the power source
Wipe with a clean dry soft cloth
Do not use any solvent or abrasive cleaners
BAYCO PRODUCTS LIMITED 1-YEAR WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in workmanship
and materials to the original purchaser for one (1) year from the date of purchase, and
includes the LEDs, housing, lenses, electronics, switches, rechargeable batteries and
chargers. Bulbs (other than LEDs) are covered for ninety (90) days from the date of
purchase. Disposable non-rechargeable batteries are excluded from this warranty.
Normal wear and failures which are caused by accidents, misuse, abuse, faulty
installation and lightning damage are also excluded.
Consequential damages, incidental damages or incidental expenses, including
damage to property are also not covered under this warranty. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights,
which may vary from state to state.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES OR
SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF THE FORM OF
ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER,
FROM ALL CAUSES OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE
LIMITED TO AND WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT
PAID BY CUSTOMER.
If this product is used for rental purposes, the warranty term is reduced to 90 days
from the date of purchase.
WARRANTY CLAIMS – USA
Return the product to the place of purchase for all warranty related issues. If this is
not possible, contact Bayco Customer Service for a Return Goods Authorization
(RGA). Do not return this product to Bayco without fi rst receiving an RGA Number
from Bayco Customer Service. When returning the product, the RGA Number must be
written on the outside of the shipping box.
WARRANTY CLAIMS – OUTSIDE OF USA
Return the product to the place where purchased for all warranty related issues.
EXTENT OF COVERED WARRANTY WORK
Bayco will repair or replace this product at our option. If it is determined that the
warranty is no longer in effect, Bayco will contact you with a repair estimate before
beginning any work.
WARRANTY QUESTIONS
If you have any questions about this warranty or any other Bayco product
inquiries, please contact Bayco Customer Service .

BAYCO PRODUCTS LIMITED 1-YEAR WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in workmanship and materials to
the original purchaser for one (1) year from the date of purchase, and includes the LEDs, housing, lenses,
electronics, switches, rechargeable batteries and chargers. Bulbs (other than LEDs) are covered for ninety
(90) days from the date of purchase. Disposable non-rechargeable batteries are excluded from this warranty.
Normal wear and failures which are caused by accidents, misuse, abuse, faulty installation and lightning
damage are also excluded.
Consequential damages, incidental damages or incidental expenses, including damage to property are
also not covered under this warranty. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you
specific legal rights, which may vary from state to state.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR
ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS
OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE. THE TOTAL CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES
OF ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT PAID BY CUSTOMER.
If this product is used for rental purposes, the warranty term is reduced to 90 days from the date of
purchase.
WARRANTY CLAIMS – USA
Return the product to the place of purchase for all warranty related issues. If this is not possible, contact
Bayco Customer Service for a Return Goods Authorization (RGA). Do not return this product to Bayco without
first receiving an RGA Number from Bayco Customer Service. When returning the product, the RGA Number
must be written on the outside of the shipping box.
WARRANTY CLAIMS – OUTSIDE OF USA
Return the product to the place where purchased for all warranty related issues.
EXTENT OF COVERED WARRANTY WORK
Bayco will repair or replace this product at our option. If it is determined that the warranty is no longer in
effect, Bayco will contact you with a repair estimate before beginning any work.
WARRANTY QUESTIONS
If you have any questions about this warranty or any other Bayco product inquiries, please contact
Bayco Customer Service.