
9/12
•After removing the packing materials, check the integrity of the heater; if you are unsure, do
not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential
sources of danger.
All packaging elements must be disposed of according to their raw material (see the symbol
stamped on each one) and according to the provisions of their municipality. The bag
containing which is unmarked due to its small size, therefore you have to follow the
procedures for the disposal of their municipality.
•Before connecting the appliance, check that the voltage values on plate match those of the
Usb port. In the event of incompatibility between the electric outlet and the plug of the
appliance, have the outlet replaced with another more suitable type by professionally qualified
personnel, who will make sure that the section of the wires of the outlet is appropriate for the
absorbed power of the appliance. In general, the use of adapters or extension cords is not
recommended; if their use is indispensable, they must conform to existing safety standards
and their current capacity (amperes) must not be less that the maximum of the appliance.
•The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
•Do not place the fan on a shelf and/or near sinks or other container of liquids (minimum
distance of 50 cm) to avoid the risk of it falling in.
•Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the
air intake grille; make sure that the front is free of unstable materials (dust, etc.).
•Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted
or wrapped around the appliance.
•Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the
appliance could upset).
•Do not place the appliance near an open flame, cooking or other heating appliance.
•In the event of a breakdown or poor operation, turn the fan heater off and ask for
professionally qualified help.
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the
power cord is damaged.
•Make sure that the fan is switched off (pos.0 ).
•Insert the USB into the port of the adaptor (not provided) or using an electronic device
(smartphone, tablet, etc.5Vdc).
•Turn on the fan through the 0 / I switch on the back , in pos. "I".
•The fan can be manually adjusted up and down by the air grating and according to his
inclination.
•To turn off completely the Mini-fan, select the 0 / I switch to pos. "0" and remove the plug
from USB into the computer.
When not in use for long periods, remove the adapter from the power plug from the wall socket
or the USB plug from the computer.