Bosch PVA-1EB User manual

Communications Systems | PVA-1EB Call station emergency button
PVA-1EB Call station emergency button
www.boschsecurity.com
uAlarm button for call station
uEN 54-16 and ISO 7240-16 system certification
The PVA-1EB is an optional emergency button for
installation in the PAVIRO call stations. For more
information, refer to the call station manual.
Certifications and approvals
Emergency standard certifications
Europe EN 54‑16
International ISO 7240‑16
Environmental directive compliance
Immunity EN 50130-4
Emissions EN 61000-6-3
ICES-003
FCC-47 part 15B class A
Environment EN 50581
Maritime EN 60945
Conformity
Europe CE/CPR
Australia RCM
Environment RoHS
Installation/configuration notes
Labeling
1. Remove button ➊from housing ➋
2. Remove red diffusor ➌from lens ➎using a sharp tool
(such as a knife)
3. Label the film insert ➍
4. Re-assemble the button including the film insert and
mount into the housing ➋
Assembly in call station
1. Disconnect the call station from all connectors.
2. Unscrew the call station baseplate (4 screws ➊).

3. Carefully remove the baseplate from the upper part,
start on the top left corner of the call station.
4. Unplug the connecting cable from the CN1 plug
connector ➋.
5. Prepare installation location ➌: Use a sharp object
(scriber or similar) to carefully punch through and cut
out the pre-cut rectangle on the inside of the housing.
Perform any follow-up work that may be required to
the installation location (e.g. filing, trimming).
6. Mount the button into the installation location, and
press in evenly (it must be possible for the cover cap
to open upward).
7. Depending on whether the right/middle/left
installation location is used, plug the ribbon cable ➍
into plug connector CN201/CN202/CN203 on the
circuit board.
8. Plug the connecting cable into CN1 again.
9. Carefully re-attach the call station baseplate.
10. Re-connect the connections.
11. Configure the button using the software.
2
3
1
Parts included
Quan
tity
Component
1Button element with cover
1 Preconfigured 4-pin connecting cable
1 Installation note
2| PVA-1EB Call station emergency button

Technical specifications
Mechanical
Product dimensions
(Height x Width x Depth)
30 mm x 21 mm x 21 mm
Net weight 0.01 kg
Shipping weight 0.02 kg
Environmental
Operating temperature -5 °C to +45 °C (+23 °F to
+113 °F)
Storage and transport
temperature
-25 °C to +70 °C (-13 °F to
+158 °F)
Humidity (non-
condensing)
5% to 90%
Altitude Up to 2000 m
Ordering information
PVA-1EB Call station emergency button
Optional emergency button that can be installed in the
PVA-15CST Call station.
Order number PVA-1EB
3| PVA-1EB Call station emergency button
Represented by:
Europe, Middle East, Africa: Germany: North America: Asia-Pacific:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
[email protected]
emea.boschsecurity.com
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.boschsecurity.com
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.asia
© Bosch Security Systems 2020 | Data subject to change without notice
18675264011 | en, V10, 17. Apr 2020