Boya BY-PM700 User manual

USB & XLR麦克风
使用说明
Instruction Manual
BY-PM700 Pro
USB & XLR
Microphone

Introduction
Package Contents
Thanks for choosing BOYA!
• BY-PM700 Pro Microphone
• USB-A to USB-C Cable (3m)
• USB-C to USB-C Cable (2m)
• 5-Pin XLR Female to Dual 3-Pin XLR Male Y-Cable (0.5m)
1
The BOYA BY-PM700 Pro is a desktop microphone with USB digital output and XLR analog
output, compatible with Android devices, Windows/Mac computers, and analog audio
devices. It provides a perfect audio solution for home studio recording, podcasting, voice
over, video conference, and more.
The microphone features pattern selection, allowing you to select Stereo, Omnidirectional,
Cardioid or Bidirectional pattern for dierent recording scenarios.
The 3.5mm headphone jack allows you to monitor and ensure the audio intelligibility during
recording. With built in controls for headphone volume, gain and muting, you are in total
control of your sound. An adjustable desktop stand allows you to place the microphone at
the angle that’s right for you.
1. Do not use the unit under water, don’t expose it to rain. Please store it in a cool, dry place.
2. Please use and store it in normal temperature. Do not move it from overheated to
super-cooled condition frequently as well as keep away from heat sources such as heater,
oven, or other devices that produce heat.
3. When using and storing, please pay attention to dust and moisture.
4. Be careful to violent collision.
Cautions

2
Product Structure
Front
1
6
Rear
7
8
Bottom
11
9
10
12
5
2
3
4

3
1. Tri-Capsule Array
2. Power Indicator
3. Mute Button
- Press to mute/unmute the microphone.
- When LED indicator is red, the microphone is muted.
4. Headphone Volume Control
5. Locking Knobs
6. Desk Stand
7. Gain Control
8. Pattern Selection
Stereo Pattern
Use the left and right channels to pick up sound, ideal for capturing
a realistic sound image.
Omnidirectional Pattern
Pick up sound equally from all directions, capturing a natural blend of voice
and ambiance with low sensitivity to wind and handling noise, as well as to
vocal plosives.
Cardioid Pattern
Maximizes the rejection of sound coming from the sides and rear of the
mic and can be used as a directional microphone to capture full, rich, and
natural-sounding audio for podcast, speech, dialog, instrument etc.
Bi-directional Pattern
Pick up sound at the front and rear of the microphone, while sides sounds
are not picked. It ts for capturing instruments, or recording an interview
between two people.

Functions
Angle Adjustment
Loosen the knobs of both sides anticlockwise.
Adjust the microphone at your desired angle, then tighten the knobs.
4
9. USB-C Port
10. 5-Pin XLR Connector
11. 5/8’’ Threaded Hole
12. 3.5mm Headphone Output
13. USB-C to USB-C Cable
14. USB-A to USB-C Cable
15. 5-Pin XLR Female to Dual
3-Pin XLR Male Y-Cable
13
14
15

5
Mounting the BY-PM700 Pro to a boom arm
1. Unscrew the locking knobs to remove the microphone from the desk stand.
2. Mount the microphone to the boom arm through its 5/8'' threaded hole.
Note:
the boom arm is not included.

How to Use
6
Using the USB digital output
1. Connect the microphone to your smartphone/computer
A
B
USB-C
devices
Mac/Windows
Computer
Using the supplied
USB-C to USB-C cable
Using the supplied
USB-A to USB-C cable

7
2. Connect headphones for audio monitoring.
3. Select the desired polar pattern and adjust the gain control and volume
control knobs according to your needs.
4. You are ready to record.

Setup for Windows 10
8
1. Connect the microphone to your
computer using the supplied cable.
2. Go to “Setting”, choose “Sound”.
3. Select “Speaker BY-PM700 Pro” as
the output device.
4. Select “Microphone BY-PM700 Pro”
as the input device.
Sound
Choose your output device
Choose your input device
Device properties
Device properties
93
Volume
Test your microphone
Input
Some apps are using custom output settings. You can personalize
these in app volume and device preferences below.
Some apps are using custom input settings. You can personalize
these in app volume and device preferences below.
Speaker (BY-PM700 Pro)
Microphone (BY-PM700 Pro)
Troubleshoot
Troubleshoot

Setup for Windows 7
9
1. Connect the microphone to your computer using the supplied cable.
2. Go to “Control Panel”-->“Hardware and Sound”--> “Sound”.
3. Select “Speaker BY-PM700 Pro” as the default device in “Sound”, under
the “Playback” menu.
4. Select “Microphone BY-PM700 Pro” as the default device in “Sound”, under
the “Recording” menu.
Sound
Playback
Speaker
BY-PM700 Pro
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Congure Properties
OK Cancel Apply
Set Default
Sound
Playback
Microphone
BY-PM700 Pro
Default Device
Recording Sounds Communications
Select a playback device below to modify its settings:
Congure Properties
OK Cancel Apply
Set Default

10
Setup for Mac
1. Connect the microphone to your computer using the supplied cable.
2. Go to Apple Icon-->System Preferences-->Sound Icon.
3. Select “BY-PM700 Pro” under the “Input” tab.
4. Select “BY-PM700 Pro” under the “Output” tab.
Sound
Name
External Microphone Microphone port
Type
BY-PM700 Pro USB
Select a device for sound input:
Settings for the selected device:
Input volume:
Output volume: Mute
Input level:
Sound Eects Output Input
Shuw volume in menu bar
Sound
Name
Headphones Headphone port
Type
BY-PM700 Pro USB
Select a device for sound output:
Settings for the selected device:
The selected device has no output controls
Output volume: Mute
Sound Eects Output Input
Shuw volume in menu bar

11
Using the XLR analog output
1. Plug the supplied XLR Y-cable into the 5-pin connector of the microphone, then
connect the other end of the cable to an audio interface or other analog audio devices.
2. When using the XLR analog ouput, the BY-PM700 Pro should be powered by 12-48V
phantom power. Please turn on the phantom power supply on the external device.
Note: When using the analog XLR output only, the 3.5mm headphone jack, volume
control and mute button are not functional. It is recommended to monitor the audio
via the external device.
5-Pin XLR Female to Dual
3-Pin XLR Male Y-Cable

Stereo, Omnidirectional, Cardioid, Bidirectional
20-20,000Hz
-36dB
5V/80mA
80dB
120dB
0~54dB
48 kHz
24 bit
1/8"(3.5mm) jack
USB-C, 5-Pin XLR
295×112×116 mm
1115g
Polar Pattern
Frequency Response
Sensitivity
Power Consumption
Signal-to-Noise Ratio
Maximum SPL
Microphone's Gain Control
Sampling Rate
Bit Depth
Headphone Output Connector
Audio Output Connector
Dimensions
Weight
Specications:
12
Features
- Professional microphone with USB digital output and XLR analog output
- Universal compatibility with Android devices, Windows/Mac computers,
analog audio devices
- Selectable Stereo, Omnidirectional, Cardioid and Bidirectional patterns
for dierent scenarios
- 3.5mm headphone jack for latency-free monitoring
- Built-in controls for gain, headphone volume and muting
- 24bit/48kHz audio resolution
- Rugged metal construction
- Durable & detachable desk stand included

13
Polar Pattern Frequency Response
Stereo
Omnidirectional
Cardioid
Bidirectional
90°270°
0°
180°
20
40
20
0
dB
Hz
-20
-40
-60
-80 200 2000 20000
90°270°
0°
180°
90°270°
0°
180°
90°270°
0°
180°
20
40
20
0
dB
Hz
-20
-40
-60
-80 200 2000 20000
20
40
20
0
dB
Hz
-20
-40
-60
-80 200 2000 20000
20
40
20
0
dB
Hz
-20
-40
-60
-80 200 2000 20000

www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
TEL: [phone]
Email: [email protected]
www.boya-mic.com / www.jiayz.com
深圳市长丰影像器材有限公司
地址:广东省深圳市龙华区观澜街道大富社区硅谷动力智能终端产业园A16栋