brennenstuhl ML DA 1206 DE 3993 User manual

2
ML DA 1206 DE 3993 I
A
B
C
D
A
D
B
ML DA 1206 DE 3993 II
E
F
F
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 2 20.04.17 11:06

3
ML DA 2407 DE 3993 I
A
B
C
D
A
D
B
ML DA 2407 DE 3993 II
E
F
F
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 3 20.04.17 11:06

10
DMobile Rechargeable SMD LED Light
Type description: ML DA 1206 DE 3993 ML DA 2407 DE 3993
Output: 10 W 20 W
Rechargeable batteries: Li-Ion 11.1 V, 2200 mAh Li-Ion 11.1 V, 4400 mAh Power adapter:
Input power: 100-240 V ~ 50/60 Hz, max. 0.2 A 100-240 V ~ 50/60 Hz, max. 0.2 A Output power: 15.0 V DC, 0.75 A 15.0 V DC, 1.5 A
Car charger cable: 12 V DC / max. 3 A 12 - 24 V DC / max. 3 A Operating time: approx. 3 hrs. 3 h (100%) or 6 h (50%) Charging time: approx. 3 - 4 hrs approx. 3 hrs.
USB outlet: not available 5 V, max. 1000 mA
Type of protection: IP54 IP54
Protection class: III III
Temperature range: -10 °C – +40 °C -10 °C – +40 °C
Dimensions: 157 x 237 x 146 mm 211 x 289 x 205 mm
Weight: 1.0 kg 1.7 kg
TECHNICAL SPECIFICATIONS:
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 10 20.04.17 11:06

11
DMobile Rechargeable SMD LED Light
ML DA 1206 DE 3993
ML DA 2407 DE 3993
SAFETY NOTES:
• Please read the user guide carefully before using the lamp and
keep it for future reference.
• Prior to every use, check the lamp and power adapter for damage.
Never use the lamp or power adapter if there is any damage.
In this case, please contact an electrician or write to the service
address provided by the manufacturer.
Non-compliance may result in risk to life due to electrical
shock!
• Do not open the device.
The lamp does not contain any components that require
maintenance. The LEDs cannot be replaced.
• Do not use the work lamp in explosive environments in which
ammable liquids, gases or dusts are present.
Risk to life!
• Keep children away from the work light.
Children cannot estimate the risk of electric shock.
• The batteries must be charged with the included power supply or
car charger cable only.
Using other power adapters or car charger cables may damage the
batteries or result in an explosion!
• A damaged protective cover must be replaced with an original
brennenstuhl® protective cover before the light can be used again.
Operating Instructions
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 11 20.04.17 11:06

12
D
Mobile Rechargeable SMD LED Light
• Unplug the light from the power supply and switch it o before
cleaning.
• Do not look directly at the light to avoid being blinded.
INTENDED USE
This LED light is intended for general use as an indoor or outdoor light,
for instance at home, on the campground, in the garage, etc.
SETTING UP AND TURNING ON THE LIGHT
Place the light on a dry, level surface. The tilt angle of the light can be
adjusted. To do so, slightly loosen the screws on the side and move
the lamp head into the desired position. Tighten the screws again.
SWITCHING THE LIGHT ON/OFF I:
To turn the light on, press button (A) on the side.
Model ML DA 1206 DE 3993:
Pressing button (A) again switches the light o.
Model ML DA 2407 DE 3993: The light will shine at 50% brightness.
To switch to 100% brightness, press button (A) again.
Pressing button (A) again switches the light o.
BATTERY LEVEL INDICATOR:
Displays the current charging status of the battery, or, how much
energy is still available. The battery level indicator (B) appears
automatically when the light is switched on. During charging,
the battery level indicator (B) displays the current battery level.
If all 4 LEDs are lit, the battery is fully charged. If the battery is nearly
empty the LED light ashes 5 times, and the battery level indicator
(B) ashes continuously. The light will then remain on for approx.
10 minutes at 50% brightness, until the deep discharge protection
switches the light o. This provides sucient time to replace the
battery or stop working.
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 12 20.04.17 11:06

13
D
Mobile Rechargeable SMD LED Light
CHARGING DEVICES WITH A USB CHARGING CABLE
E. G.SMARTPHONES:
only available on ML DA 2407 DE 3993!
Suitable for products with a charge current of max. 1000 mA.
Connect the device you wish to charge to the USB port (C) on the side
of the light using a USB cable. After charging, put the cap back on.
CHARGING THE BATTERY:
• To ensure optimum functionality, we ensure completely
discharging the battery during initial use and then fully charging it.
• The charging socket (D) is located under the end cap at the front of
the battery.
• Use the battery level indicator (see description above) to determine
the battery level.
If all 4 LEDs are lit, the battery is fully charged.
• Please note: If the light is switched on while charging with the
included power supply or car charger cable the battery will stop
charging.
• The battery can also be charged separately from the lamp, see also
the "Replacing the battery" section.
• If the light is not used for an extended period of time the battery
must be charged approximately every 3 months to ensure a long
battery lifespan.
• After charging, make sure to close the charging port with the cap.
BATTERY REPLACEMENT II:
The battery (E) is quick and easy to replace. Simply unfasten the two
clips (F) at the top and bottom and remove the battery from below,
see drawing. This way, the battery can be charged while continuing to
work using a separately available replacement battery.
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 13 20.04.17 11:06

14
D
Mobile Rechargeable SMD LED Light
MAINTENANCE:
ATTENTION: The LED light does not contain parts that need
servicing.
The LED light source in this lamp may only be replaced by the
manufacturer or a service technician commissioned by the
manufacturer or a comparably qualied person.
Never open the lamp when the mains supply cable is connected.
CAUTION: Risk of life due to electric shock!
CLEANING:
Do not use solvents, corrosive cleaners or the like.
Use a dry or slightly moist cloth for cleaning ONLY.
Disposal
Do not dispose of electronic devices in the rubbish bin!
In accordance with Directive 2012/19/EC on waste electrical and
electronic equipment and corresponding national laws, used
electrical equipment must be separated from other household
waste and reused or recycled in an environmentally responsible
manner. Contact your local authorities for information on where
to take your used device for recycling.
Improper disposal of batteries and rechargeable batteries
can harm the environment!
Batteries and rechargeable batteries do not belong in the
household rubbish. They may contain toxic heavy metals and
must be treated as hazardous waste. Take your used batteries
and rechargeable battery packs to a communal collection point.
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 14 20.04.17 11:06

15
D
Mobile Rechargeable SMD LED Light
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 –3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
Please visit the Service/FAQ section of our homepage,
www.brennenstuhl.com, for more information.
BA-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 15 20.04.17 11:06