BROSA Smeaton Large Outdoor Dining Table User manual

ASSEMBLY GUIDE
Smeaton Large Outdoor Dining Table
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Leg x 2
Middle Rail x 1
Supporting Frame x 1
Table Top x 1
Hardware
What you need
1
23
4
A x 24 B x 24 C x 1

Step 1 Attach the legs (1) to the middle rail (2). Fit a washer
(B) to a bolt (A) and then insert the bolt into the
hole. Fix the bolt with the Allen key (C) but do not
tighten it yet. Repeat this for the remaining holes.
A
B
C
A x 6
B x 6
C x 1
1
1
2

Step 2 Align the structure formed in Step 1 with the sup-
porting frame (3) and make sure the bolt holes over-
lap. Fit a washer (B) to a bolt (A) and then insert the
bolt into the hole. Fix the bolt with the Allen key (C)
but do not tighten it yet. Repeat this for the remain-
ing holes.
A x 12
B x 12
C x 1
3
A
B
C

Step 3 Place the table top (4) on a level surface with the
underside facing upward. Align the structure formed
in Step 2 with the table top and make sure the holes
on the brackets overlap the holes on the table top.
Fit a washer (B) to a bolt (A) and then insert the bolt
into the hole. Fix the bolt with the Allen key (C) but
do not tighten it yet. Repeat this for the remaining
holes.
A x 6
B x 6
C x 1
A
B
C
4

C x 1
Step 4 Tighten all bolts with the Allen key.

Step 5 Place the table upright on a level surface. Enjoy your
new outdoor dining table!