BROSA Haim Clothes Rack User manual

Haim
Clothes Rack
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
HardwareHardware
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
B x 4
(M6 x 20)
A x 8
(M6 x 12)
D x 4
(Ø19/Ø17 x 30)
C x 4
(Ø6.5/Ø19 x 11) (M6)
E x 1
②
③
④
①
Stand x 4
Connector x 1
Plate x 1
Collar x 1

Step 1 Identify Upside and Underside of the connector ③ by
the holes on each side as shown in the diagram
below.
Attach the stands ①to the connector ③ making sure
the Upside of the connector faces upward.
Insert the grub screws B into the holes from
Underside of the connector and tighten them with
the Allen key E.
B x 4
E
B
E x 1
Upside Underside
①
③ ③
③

Step 2 Fit the collar ② into the middle of the structure
formed in Step 1 from the lower position.
Align the holes of the collar with the holes of the
stands. Fit a bolt Ainto a hole and tighten it with your
hand until it is finger-tight. Repeat this for the
remaining holes.
After all bolts are inserted in place, push the collar
downward so that it rests steadily upon the bolts.
Tighten all bolts with the Allen key E.
A x 8
E x 1
E
A
②

Step 3 Insert foot caps D into the bottom of the stands and
then insert the suction cups Cinto the holes on the
connector.
C x 4
D x 4
C
D

Step 4 Incline the plate ④slightly so that it goes into the
middle of the structure.
Even the plate and place it upon the suction cups.
④

Step 5 Place the completed piece of furniture on a level
surface. Enjoy your new Haim Clothes Rack!

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
2. Do not hang heavy objects on furniture.
3. When repositioning furniture: lift, don’t drag.
4. Keep sharp objects away.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but ensure you dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. Nail polish
and nail polish remover can erode furniture. Dab don’t rub these stains.
3. Take care when using pens or markers on furniture. Keep liquids
away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments when they loosen.
Exposure
1. Keep furniture away from intense direct sunlight. Exposure can cause
cracks or discolouration.
2. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 50cm from heat or air conditioning.