BROSA Vermont Square Coffee Table User manual

ASSEMBLY GUIDE
Vermont Square Coee Table
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
Hardware
Top frame x 1
Side frame x 2
Leg Stretcher x 2
Table top x 1
Hardware
B x 8
(Short Bolt)
(Spec: M6x16)
A x 4
(Long Bolt)
(Spec: M6x35)
C x 8
(Screw)
(Spec: M5 x 10)
D x 4
(Foot Cap)
E x 1
(Allen Key)
What you need

Step 1
B x 8
Insert foot caps (D) into the corner holes under the side
frames. Align the side frames to the stretchers so that the
bolt holes overlap. Insert short bolts (B) and tighten with a
screwdriver.
D x 4
Step 2
A x 4
Align the top frame with the side frames so that the bolt
holes overlap. Insert long bolts (B) and tighten with an allen
key. With help of the partner align the table top to the leg
structure so that the screw holes overlap and gently lift
down. Insert screws (C) and tighten with a screwdriver.
C x 8
D
D
D
D
B
C
A
E x 1
E

Step 3 Enjoy your new table!