BROSA Junior Kids Single Bed User manual

ASSEMBLY GUIDE
Junior Kids Single Bed
v1.0

Slat x 16
Centre Bar x 1
Slat Cap x 32
Side Rail x 2
A x 8
(Bolt)
(M6 x 60)
B x 8
(Cross Dowel)
(Ø10 x 12)
D x 1
(Allen Key)
C x 4
(Screw)
(M3.5 x 25)
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
What you need
12
Footboard x 1
Headboard x 1
Components
Hardware
3
4
56
3

Step 1 Insert the cross dowels (B) into the side rails (3).
Make sure the threaded holes on the cross dowels
line up with the holes on the side rails horizontally.
Attach the side rails to the headboard (1). Insert the
bolts (A) into the cross dowels through the head-
board and tighten them with the Allen key (D).
A x 4
B x 4
D x 1
B
B
1
3
3
A
A
D

Step 2 Insert the cross dowels (B) into the side rails (3). Make
sure the threaded holes on the cross dowels line up
with the holes on the side rails horizontally.
Attach the side rails to the footboard (2). Insert the
bolts (A) into the cross dowels through the footboard
and tighten them with the Allen key (D).
A x 4
B x 4
D x 1
2
3
3
B
B
AD

Step 3 Align the centre bar (4) with the dowels on the side
rails. Insert the screws (C) into the holes and tighten
them with a screwdriver.
Step 4 Insert sixteen slat caps (6) into the holes on one of
the side rails.
C
C x 4
4
6

Step 5 Insert the slats (5) into the installed slat caps.
Step 6 Attach the remaining slat caps (6) to the other ends
of the slats and then insert the slat caps into the
other side rail (3).
5
6

Step 7 Enjoy your new single bed!