BROSA Caledonia Rattan Bookcase with Storage User manual

Caledonia Rattan
Bookcase with Storage
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
A x 6
(M6 x 40)
B x 6
(Ø8 x Ø25)
C x 6
(Ø8 x Ø16)
D x 1
(M4)
Body x 1
①
Leg Frame x 2
②
Shelf x 2
③

Step 1 Align the leg frames ②with the holes on the
bottom of the body ①. Make sure the stickers
match as per the diagram below.
Fit a spring washer C to a bolt A followed by a flat
washer B. Insert the bolt into a hole on the leg
frame. Screw the bolt with your hand and leave it
loosely attached. Repeat this for all holes on the
leg frames.
A x 6
B x 6
C x 6
A
B
C
①
②

Step 2 Once all leg frames are fixed in place, tighten all
bolts with the Allen key D.
D x 1
D

Step 3 Fit the shelves ③into the inner space. Rest the
shelves on the wooden rails.
③

Step 4 Place the completed piece of furniture the right
way up in its desired location.
Adjust the foot stoppers to make all legs sit firmly
on the ground.

Step 5 Enjoy your new Caledonia Rattan Bookcase with
Storage!

Serious or fatal crushing injuries can occur from furniture tip-over.
Never allow children to climb or play on furniture.
Warning

It is STRONGLY RECOMMENDED to install anti-tip kit to avoid furniture
tip-over.
Anti-Tip Kit Installation
Hardware
Wall Fixings
a x 4 b x 2 cx 4 dx 4 ex 4
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily
pull away from the
core structure.
Brick or Masonry
Use an appropriate
wall plug provided
you are sure your
wall is sound.
Cavity Wall
Special toggle wall
plugs are needed.
Seek expert
advice.
Because of the variety of wall compositions, we can’t provide you with
appropriate wall fixings. Please identify your wall composition and
contact your local hardware store to get the appropriate fixings.

What You Need
Attach the brackets a securely to the back top of the
unit using the short screws cprovided.
Step 1
ax 2
cx 4
ac

Determine where the piece is to be placed and mark
locations on the wall for the mounting brackets ausing a
pencil. Move the furniture out of the way so that the
brackets can then be mounted to the wall.
Step 2
Instructions below demonstrate how to attach the kit to the wall using
the wall plugs provided. But please do identify the type of your wall
and choose the appropriate wall fixings.
ax 2
a

Drill holes for the wall plugs using a drill. Knock the plugs
e into the holes using a hammer. Place the brackets
against the plugs again and fix the brackets with the long
screws d.
Step 3
dx 4
ex 4
d
e

Lace the nylon strap b down through the brackets. Slide
the thin end of the strap through the receiving end on
the nylon strap. Pull to tighten the piece of furniture snug
against wall.
Step 4
bx 2
b

1. Upon receiving your product, you might find that the door doesn’t
align well. Please note that it’s not a product flaw and can be adjusted
following the instructions below.
Troubleshooting

Loosen the screw at the end of the hinge arm.
Step 1
Gently pull the door so that it is separated from the
body.
Step 2
2. Follow the steps below to disassemble your doors when needed.
Reverse the steps above to get the doors attached again.

User Recommendation
Rattan is a natural material which is both durable and flexible. Most
rattan furniture only needs basic cleaning and care to preserve its
natural strength and colour. Follow these steps to keep your rattan
furniture looking beautiful for years to come and ensure its longevity.
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
3. Furniture can be dangerous if incorrectly assembled. Assembly
should be carried out by competent people.
Placement
1. This product is for indoor use only.
2. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
3. Do not place heavy objects on furniture.
4. When repositioning furniture always lift, don’t drag.
5. Keep sharp objects away from furniture. They cause scratches and
splinters to the surface.
6. Do not stack furniture.
General Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but remember to dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments if they loosen.

7. Use protective coasters and mats for hot items on the furniture.
8. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
9. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 60cm from heating or air conditioning.
10. Do not place furniture near open flames.
Rattan Cleaning and Maintenance
1. Clean rattan surfaces regularly. A monthly or even weekly cleaning
helps prevent dust from building up in crevices.
2. Use a vacuum with the brush attachment to remove loose dust and
debris from the crevices and cracks.
3. Use a toothbrush, cocktail stick or any other fine tool to remove
stubborn soil or debris.
4. Humidity may cause rattan webbing to go loose and bulge slightly. It
will eventually dry tight. Should the rattan webbing stay loose and look
stretched, wet the webbing with a damp cloth and dry out the piece in
a well-ventilated area. It helps restore the tightness.
5. If mildew or mould forms, mix bleach with water and use a scrub
brush to clean the affected area. Try not to saturate the rattan. Wipe
down the area with a fresh damp cloth to remove any bleach residue.
Allow the furniture to air dry.
6. Leaving the rattan webbing in its natural state allows the material to
breathe and gives maximum longevity.
7. Applying some linseed oil helps nourish rattan.
8. Occasionally inspect the rattan surface to identify any splinters or
broken webbing. Remove the splinters immediately to avoid any
injuries. If the breakage is significant, seek further advice by contacting
us directly.