BROSA Buso Dining Table User manual

v1.0
ASSEMBLY GUIDE
Buso Dining Table

Table top x 1
A x 1 (Leg Part)
B x 1 (Leg Part)
C x 1 (Leg Part)
D x 1 (Leg Part)
Hardware
What you need
F x 12
(Spring Washer)
I x 1
(Allen Key)
G x 12
(Flat Washer)
H x 2
(Corner Fixture)
E x 12
(Bolt)
Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.

Step 1 Insert the leg part (A) into the hole of the leg part (B)
like shown on the diagram.
Step 2 Attach the remaining leg parts (C) (D) to the structure
formed in the previous step like shown on the diagram.
A
B
A
B
C
D

Step 3 Align a corner xture (H) to the leg structure formed in
the previous step. Fit a spring washer (F) then a at
washer (G) to a bolt (E) and screw into the holes using
allen key (I). Repeat for the second corner xture on
the other side.
F x 6
I x 1
G x 6
E x 6
H x 2
E
I
F
G

Step 4 Align a leg structure to the underside of the table top so
that the bolt holes are overlapping. Fit a spring washer
(F) then a at washer (G) to a bolt (E) and screw into
the holes using allen key (I). Repeat for the other holes.
E
I
F
G
F x 6
I x 1
G x 6
E x 6
H x 2

Step 5 Gently lift the table and place upright on a level surface.
Enjoy your new dining table!