BROSA Siesta 3 Seater Sofa Bed User manual

ASSEMBLY GUIDE
Siesta 3 Seater Sofa Bed
v1.0

Components
Upon unpacking your sofa bed from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new sofa bed.
C x 16 (Bolt)
What you need
Hardware
B x 1 (Allen key)
A x 4 (Leg)
Sofa bed body x 1

Step 1
A x 4
C x 16
Align a leg (A) to the underside of the body so that
the bolt holes are overlapping. Insert the bolt (C) into
the hole and tighten with the allen key (B). Repeat for
all four legs.
B x 1
A
C
B
Step 2
Step 2.1 Step 2.2
Step 2.1 Unzip the back fabric and pull the support legs
out.
Step 2.2 Gently lift the sofa bed and place upright on a
level surface.

Step 3 To change the back position from bed to sofa, rise the
back (step 3.1) to either of the two sitting angles then
turn the supporting legs to hide inside compartments
(step 3.2).
step 3.1
step 3.2
Step 4 To change the back position from sofa to bed, take
out the supporting legs (step 4.1). Push the back a
little forward (step 4.2) then put it down (step 4.3).
step 4.2
step 4.1
step 4.3

Step 5 Enjoy your new sofa bed!