BROSA Clem Sofa Bed User manual

ASSEMBLY GUIDE
Clem Sofa Bed
v1.0

Components
Upon unpacking your sofa bed from it’s delivery box, you should have one
single component (the body of the sofa bed). Additional components are
packed inside the body, you will learn how to access and utilise these
components in the next steps.
Follow the zip to the component compartment. Unzip the bottom fabric and
take out the additional components. Keep the bottom fabric open.
Unpacking
2
3
4
5
6
1
x 4

Hardware
You will need
B x 14 D x 4
A x 8
H x 1G x 1C x 8 E x 6 F x 4

Step 1 1.1 Insert and tighten the threaded rods (A) into the
holes on armrests (2),(3).
1.2 Turn the sofa bed body so that the underside is
facing you. Fit armrests into corresponding holes on
sides of the sofa bed body.
1.3 Fit a big washer (B) and hex nut (C) onto a rod
(A) of armrests from Step 1.2.Screw the hex nut
using the socket wrench (G) and repeat for the other
bolts to secure the armrests in place.
A x 8
Step 1.2
B x 8
C x 8
G x 1
Step 1.3
A
2
1
3
GCB
3

Step 2 Align a decorative panel (4) with the sofa bed front.
Fit a large washer (B) into a short bolt (E) then screw
it using the allen key (H). Repeat for the other two
holes then repeat for the other decorative panel (5).
Zip the bottom fabric back when all is done.
E x 6
B x 6
H x 1
Step 3 Orient legs (6) as below diagram indicates. Fit small
washers (F) into long bolts (D) then t the bolts into
the legs. Screw the bolts with the allen key (H).
D x 2
F x 2
H x 1
H
E
B
H
D
F

Orient the other two legs (6) as below diagram indi-
cates. Fit small washers (F) into long bolts (D) then
t the bolts into the legs. Screw the bolts with the
allen key (H).
Step 4
D x 2
F x 2
H x 1
H
D
F

Step 5 5.1 Unzip the back fabric and pull the support legs
out. Slightly push the back forward and then put it
down gently then you will get a bed position.
5.2 Push the back upwards until it is steady and fold
the support legs back into the back fabric then you
will get a sofa position again.
Enjoy your new sofa bed!
Step 5.1
Step 5.2
1
12
3
2
2
1