BROSA Shamal Coffee Table User manual

v1.0
ASSEMBLY GUIDE
Shamal Coee Table

Components
Upon unpacking your table from its delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
Table top x 1
C x 1 (Horizontal Rail) B x 2 (Vertical Rail)
A x 2 (Leg)
Hardware
What you need
H x 1
(Allen Key)
G x 14 (Flat Washer)
8 x 19 x 1.2mm
F x 10 (Bolt)
8 x 63mm
E x 2 (Bolt)
8 x 38mm
D x 2 (Bolt)
8 x 51mm

Step 1 Align a vertical rail (B) to the horizontal rail (C) so that
the screw holes are overlapping. Fit a washer (G) to a
long bolt (F) and screw into a hole using the allen key
(H). Repeat for the other vertical rail.
Align the structure formed in step 1 to a leg (A),tting
them together . Fit a washer (G) to a short bolt (E) and
screw into a hole using the allen key (H). Repeat for the
other leg.
G x 2
H x 1
Step 2
F x 2
G x 2
H x 1
E x 2
B
B
C
G
G
FH
H
E
A
A

Step 3
Step 4 Gently lift the table and place upright on a level surface.
Enjoy your new table!
G x 10
H x 1
F x 8
D x 2 H
H
G
G
D
F
Align the structure formed in step 2 to the table top. Fit
a washer (G) to a medium bolt (D) and screw into a
diagonal hole on a vertical rail using the allen key (H).
Repeat for the other hole. Fit a washer (G) to a long bolt
(F) and screw into remaining holes using the allen key
(H).