BROSA Mia Large Entertainment Unit User manual

ASSEMBLY GUIDE
Mia Large Entertainment Unit
v1.0

Components
Upon unpacking your storage from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new storage.
A x 4
(Cross Dowel)
B x 4
(Threaded Bolt)
C x 4
(Washer)
D x 4
(Lock Washer)
E x 4
(Hex Nut)
F x 1
(Spanner)
Hardware
What you need
Corner Leg x 4
Central Leg x 2
Body x 1
aa x 2
(Mounting Plate)
bb x 1
(Nylon Strap)
cc x 2
(Screw)

Step 1 Insert the cross dowel (A) into the top hole of the
corner leg so that the side marker faces the bolt hole.
Repeat for all four corner legs.
Step 2 Screw the threaded bolt (B) into the corner hole.
Repeat for all four legs.
A x 4
B x 4
A
B

Step 3 Place the body on a at surface on it’s back. Insert a
leg construction formed in previous steps into a
corner opening. Fit a washer (C), a lock washer (D)
then a hex nut (E) to the threaded bold and tighten
with the spanner (F).Repeat for the remaining legs.
C x 4
D x 4
E x 4
F x 1
C
D
E
F

Step 4 Screw central legs onto metal plates. Continue to
tighten until they are securely fastened. With help of
the assistant, carefully stand the unit uptight.

Step 5 Fix a mounting plate (aa) to the back of the storage
using at head screws (cc).
By using appropriate fastener based upon wall com-
position, x another mounting plate (aa) to the wall.
Connect two plates with the nylon srap (bb).
Tighten the strap so that the table is xed in the
place.
WALL
BACK SIDE
aa
bb
cc aa
aa x 2
cc x 2
bb x 1

Step 6 Enjoy your new storage!