BROSA Tallinn User manual

ASSEMBLY GUIDE
Tallinn Chest of Drawers
v1.0
All manuals and user guides at all-guides.com

Components
Upon unpacking your chest of drawers from it’s delivery box, you should have
the separate pieces shown below. Follow the steps on the next pages to
assemble your new chest of drawers.
Chest of drawers x 1
Hardware
C x 6
Spec: Ø3.5mm x L11mm
Leg frame x 1
B x 3
Spec:
Spec: Ø3.8mm x L16mm
A x 10
What you need
2
1
All manuals and user guides at all-guides.com

Step 1
Step 2
Align leg frame (2) to the underside of the chest (1).
Insert a screw (A) into a hole, using the screw driver to
tighten. Repeat for all of the remaining bolts.
Align a handle (B) to its corresponding spot on the
drawer front panel and use screws (C) to secure it into
place. Repeat for the remaining handles (B).
B x 3
C x 6
A x 10 1
2
All manuals and user guides at all-guides.com

Step 3 Gently lift the chest of drawers and place upright on a
level surface. Enjoy your new chest of drawers!
All manuals and user guides at all-guides.com