BROSA London Set of 2 Dining Chairs User manual

London Set of 2
Dining Chairs
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 1 person.
And it's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
①Chair Body x 2
②Front Leg Frame x 2
③Back Leg Frame x 2
A x 20
(M6 x 15)
B x 1

Before carrying out assembly, distinguish the
front leg frame from the back leg frame.
Back leg frame ③ inclines more than the front leg
frame ② as shown in the diagram below.
Step 1
Front Leg FrameBack Leg Frame ②③

Fit the front leg frame ②into the recess in the
front of the chair body ①. Insert a bolt Ainto a
hole on the leg frame and make it grab the
threads of the hole on the chair body. Leave the
bolt loosely attached. Repeat this for the remain-
ing holes and then repeat the process for the
back leg frame ③.
Step 2
A x 10
②
③
①
A

Step 3 Once both leg frames are fixed in place, tighten
all bolts with the Allen key B.
B x 1
B

Step 4 Repeat the process above for the other piece of
chair. And then enjoy your new London Set of 2
Dining Chairs!

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
2. Do not place heavy objects on furniture.
3. When repositioning furniture: lift, don’t drag.
4. Keep sharp objects away. Don’t drag items along the surface.
5. Do not stack furniture.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but ensure you dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. Nail polish
and nail polish remover can erode furniture. Dab don’t rub these stains.
3. Take care when using pens or markers on furniture. Keep liquids
away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments when they loosen.
Exposure
1. Use protective coasters and mats between hot items and furniture.
2. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
3. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 50cm from heat or air conditioning.
4. Do not place furniture near open flames.