BROSA Frank Round Dining Table User manual

Frank Round
Dining Table
ASSEMBLY GUIDE
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
A x 6
(M8 x 40)
B x 6
(Ø8 x Ø25)
Cx 1
(M6)
Table Top x 1
Leg Frame x 2
②
②
①

Align a leg frame ② with the holes on the bottom
of the table top ①. Make sure the labels on each
side match as shown in the diagram below. Fit a
washer B to a bolt A and then insert the bolt into
a hole. Tighten the bolt with your hand until it is
finger-tight. Repeat this for the remaining holes
and then repeat the process for the other leg
frame.
Step 1
Ax 6
Bx 6
①
②
B
B
A
A
A
A
A
B
②

B
Tighten all bolts with the Allen key C.
Step 2
Cx 1
B
A
A
B
B
C

Lift the piece of furniture off the ground and
place it upright on a level surface. Enjoy your new
Frank Round Dining Table!
Step 3

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
2. Do not place heavy objects on furniture.
3. When repositioning furniture always lift, don’t drag.
4. Keep sharp objects away. They cause scratches and splinters to the
surface.
5. Do not stack furniture.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but remember to dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments if they loosen.
Exposure
1. Use protective coasters and mats for hot items on the furniture.
2. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
3. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 60cm from heating or air conditioning.
4. Do not place furniture near open flames.