BROSA Bardot Side Table User manual

ASSEMBLY GUIDE
Bardot Side Table
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Glass Table Top x 1 Top Frame x 1 Base Frame x 1
Hardware
What you need
A x 4
1
23

Step 1 Step1.1 Align a foot stopper (A) with the holes on the
bottom of the base (3) and rmly press the stopper
to the base.
Step1.2 Flip the base frame the right way up and
place it on a level surface.
A x 4
A
Step 1.1
Step 1.2
3

Step 2 Step 2.1 Fit the pole of the top frame (2) into the hole
of the glass table top (1). Incline the table top slightly
so that it passes through the pins on the inner side of
the frame.
Step 2.2 Place the table top upon the pins.
Step 2.1
Step 2.2
1
2

Step 3 Step 3.1 Pull the pin out of the pole of the base
frame. Fit the poles of the top frame into the poles of
the base frame.
Step 3.2 Press the top frame gently till you get a
proper height. Make sure the hole on each pole over-
laps and insert the pin back again.
Step 3.1 Step 3.2

Step 4 Adjust the height of the table by repeating Step 3.
Enjoy your new side table!