BROSA Maison Storage Coffee Table User manual

ASSEMBLY GUIDE
Maison Storage Coee Table
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
A x 4
(Ø12 x 90/Ø8)
(Cross Dowel)
B x 8
(M8 x 76)
(Threaded Rod)
C x 8
(Ø19 x Ø8 x 1.2)
(Washer)
D x 8
(Ø13 x Ø8 x 1.8)
(Lock Washer)
E x 8
(Ø12 x Ø8 x 6)
(Hex Nut)
F x 1
(Ø8 x 88 x 2)
(Spanner)
Hardware
What you need
Leg x 4
Table top x 1

Step 1 Insert the cross dowel (A) into the top hole of the leg.
Repeat this for all four legs.
Step 2 Screw two threaded rods (B) into the corner holes.
Repeat this for all four legs.
A x 4
B x 8
A
B

Step 3 Place the table top on a at surface with underside
facing up. Insert the leg construction formed in pre-
vious steps into a corner opening and make sure the
rods protrude from the holes. Fit a washer (C), a lock
washer (D) and then a hex nut (E) to the threaded
rod and tighten with the spanner (F). Repeat this to
secure the second bolt. Repeat the whole process for
the remaining legs.
C x 8
D x 8
E x 8
F x 1
C
D
E
F

Step 4 Place the table on a at surface and enjoy your new
table!