BROSA Sloan Electric Loveseat Recliner User manual

Sloan Electric
Loveseat Recliner
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Safety
1. Read and follow all the instructions and warnings in this guide
carefully before attempting to operate the recliner for the first time.
Failure to follow the guide may result in injuries, product damage and
will void your warranty.
2. The recliner has to be placed within 3.8 meters of the power outlet.
3. Ensure the recliner is clear of walls, furniture and other obstructions
that may interfere with a clear path for operation.
4. The recliner has a maximum weight capacity of 150kg for each seat.
Staying within the weight limit keeps you safe from injuries and product
damage.
5. The recliner is not suitable for adults and children with physical,
sensory or mental challenges. Please always provide supervision and
instructions for persons with disabilities.
6. Children should be supervised to ensure that they do not play on
the recliner or with the controls.
7. Ensure that all the cords are kept clear of the mechanism under the
seat.
8. The recliner is only to be used with the electrical components
provided. If any component is damaged, contact us directly.
9. Keep hands and feet clear of the mechanism when operating the
controls.
10. Keep children and pets away from all moving parts while operating
the recliner.
11. Always leave the recliner in an upright and closed position after use.
12. Do not get out of the recliner while the footrest is extended.
Footrest must be closed before getting out of or into the seat.
13. Do not sit on the armrests of the recliner.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
⑥Power Supply x 2 ⑦Extension Cord x 2
(2.5m)
⑧Power Cord x 2
(1.2m)
①Left Chair Base x 1
⑤Foot x 8 ③Right Chair Base x 1
④Right Backrest x 1
②Left Backrest x 1

Step 1 Open one of the boxes from the bottom. Follow the
red string to locate the box of the power supply,
cords and the package of the feet. Use a pair of
scissors to release them from the nylon strips.
⑤
⑥
⑦
⑧

Step 2 Align a foot ⑤ with the hole on the bottom of the
chair base. Screw the foot until it is tight and
secure. Repeat this for the remaining feet.
⑤

Step 3 Flip the chair base ① the right way up. Remove the
protectors from the metal arms at the back of the
chair base.
①

Step 4 With assistance of a friend, hold up the backrest ②
and stand at the back of the chair base.
Carefully align the sleeves on the inner sides of the
backrest with the metal arms. Push the backrest
downwards firmly until it is fully slotted and locked
into position.
②

Step 5 Repeat the process above for the other box.

Step 6 Place the completed two sections in their desired
location. Align the brackets on each section and
then lift the left chair base to make the brackets
interlock.