BROSA Mia User manual

ASSEMBLY GUIDE
Mia Coee Table With Shelf
v1.0

Components
Upon unpacking your coee table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
Cross dowel
M8 x 12 x 30mm
Threaded bolt
08 x 60mm
Flat washer
8.4 x 17 x 1.6mm
Hex nut
08 x 13mm
Steel dowel
07 x 49.5mm
Lock washer
8.4 x 2mm
Table top x 1
x 4
x 4
x 4
x 4
x 4
x 4
x 4
1Leg x 2
Spanner
Grub screw
x 1
3
Fixed shelf x 1
2Leg x 2 4
A
D
C
B
E
H
G
F
Item Qty.Description Item Qty.Description

Step 1
A x 4
B x 4
G x 4
1.1 Lay drawer box unit (2) on a at surface.Insert cross dowels
(A) into legs (3) & (4) by placing each cross dowel (A) into the
hole on top of each leg. Ensure the horizontal marking on each
tting is facing as shown.
1.2 Screw threaded bolt (B) into cross dowel (A) that are
already concealed in legs (3) & (4) until they are securely
fastened as shown.
1.3 Attach steel dowels (G) into legs (3) & (4) as shown. Use a
pozi screwdriver to turn steel dowel (G) clockwise to x.
Ensure the direction of steel dowel (G) are facing correctly as
per diagram.
‘O’ ring
Step 1.1
Step 1.3
Step 1.2

Step 2
C x 1
D x 1
E x 1
F x 1
2.1 Attach a leg (3) into place by inserting threaded bolt (B)
through the pre-drilled hole of metal corner bracket as shown.
2.2 Insert in order the at washer (C) lock washer (D) and hex
nut (E) onto threaded bolt (B). Tighten hex nut (E) using
spanner (F) until securely fastened as shown.
Step 2.1 Step 2.2

Step 3
H x 1
3.1 With help of assistant, slide xed shelf (2) into the slot and
onto steel dowel on leg (3) as shown. Ensure xed shelf (2) is
placed completely in the slot of leg.
3.2 Secure part (2) to part (3) using grub screw (H) as shown.
Use a pozi screwdriver to turn screw (H) clockwise to tighten.
Step 4
C x 1
D x 1
E x 1
F
H x 1
4.1 Attach a leg (3) into place by inserting threaded bolt (B)
through the pre-drilled hole of metal corner bracket as shown.
Ensure the slot and dowel on leg (3) is aligned correctly with
xed shelf (2) before attaching.
4.2 Insert in order the at washer (C), lock washer (D) and hex
nut (E) onto threaded bolt (B) as shown. Tighten hex nut (E)
using spanned (F) as shown. Continue to retighten hex nut (E)
until it is securely fastened.
4.3 Secure part (2) to part (3) using a grub screw (H) as shown.
Use a pozi screwdriver to turn tting (H) clockwise to tighten.
Step 3.2
Step 3.1
Step 4.1
Step 4.2
Step 4.3

Step 5 5.1 Attach legs (4) into place by inserting threaded bolts (B)
through the pre-drilled hole of metal corner brackets as
shown. Ensure the slots and dowels on legs (4) are alligned
correctly with xed shelf (2) before attaching.
5.2 Insert in order the at washers (C), lock washers (D) and
hex nuts (E) onto threaded bolts (B). Tighten hex nuts (E)
using spanner (F) as shown. Continue to re-tighten hex nuts
(E) until they are securely fastened.
5.3 Secure parts (4) to part (2) using grub screws (H) as shown.
Use a pozi screwdriver to turn ttings (H) clockwise to x.
C x 1
D x 1
E x 1
F x 1
H x 1
Step 5.1
Step 5.2
Step 5.3
Step 5.3

Step 6 Stand the unit upright. Assembly is complete.
Enjoy your new table!