BROSA Riviera Outdoor Hanging Chair User manual

Riviera Outdoor
Hanging Chair
ASSEMBLY GUIDE
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
A x 2
(M10 x 60)
C x 4
(M8)
D x 2
(M8)
E x 1 F x 1B x 2
(M8)
G x 1
(M5)
H x 1
(M14 x 70)
Body x 1 Stem x 1
Base x 1
①②
③

Insert the stem ② into the tube of the base ③
and make sure the bolt holes on each component
overlap.
Fit a spring washer D to a bolt A followed by a flat
washer C. Insert the bolt from one side and make
sure it protrudes from the other side. Attach a flat
washer C to the bolt followed by a nut B. Tighten
the bolt and nut with the spanner Hand Allen key
G.
Repeat this for the other hole.
Step 1
Ax 2
Bx 2
Cx 4
Dx 2
Gx 1
Hx 1
②
③
DA
C
C
B
H
G

Insert the connector Einto the hole on top of the
stand.
Step 2
E x 1
E

Connect the body with the stand using the hook
spring F.
Step 3
F x 1
F

Place the piece of furniture in its desired location.
Enjoy your new Riviera Outdoor Hanging Chair!
Step 4

The maximum user weight for the chair is 120kg. Please do NOT
overuse it with an exceeded weight.
Warning
MAX.
120 KG

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
2. Place furniture in a covered area protected from rain when used
outdoors.
3. Store furniture in cool, ventilated rooms. Do not leave it outdoors
unprotected more than necessary.
4. Do not place heavy objects on furniture.
5. When repositioning furniture always lift, don’t drag.
6. Keep sharp objects away. They cause scratches and splinters to the
surface.
7. Do not stack furniture.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but ensure you dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments when they loosen.