BullFrog CAYMAN 6660 User guide

ASSEMBLY AND INSTRUCTION MANUAL
Modern lookPlace individual Soft stitched workmanship
www.bullfrog-design.com
30.05.2021
MODEL 6660 CAYMAN
© 2010 K URT BEI E R &KATI QU I N G E R

connector marking
Mount plate with
holes flush with
fleece edge.
Connect flush to
fleece edge.
To interconnect several elements you have to mount the supplied connectors at the bottom of
the elements. In order that you mount the connectors at the right position it is colourmarked
with helper lines. There are 2 helper lines per connector side (see figure).
At first element must be attached 2 metal reeds, at the second element 2 ratchets.
Cover clamp fleece
back side
front side
The connectors distance from the back side are 20 cm (centrig of connectors).
The distance between the connectors is 40 cm center-center.
20 cm 40 cm
Metal reed
Ratchet
Mounting of connectors
6660 CAYMAN
© 2010 K URT BEI E R &KATI QU I N G E R

2. Turn connector ratchet 1 of element A to the outside.
3. Firmly push together part A and B, until metal guides 2 catch into guides 1.
4. In case of dismounting lift part B with the metal guides 2 and pull away.
Mounting of connectors
A B
12
1. Position the elements at the place supposed to stay.
6660 CAYMAN
© 2010 K URT BEI E R &KATI QU I N G E R