CABINETS TO GO Findley & Myers WM3018 User manual

Page 1
WallMicrowaveCabinet
ASSEMBLY INSTRUCTIONS
Theseassemblyinstructionsareonly applicableforWallMicrowaveCabinets
ITEM#WM3018 

Page 2
►ItemsQuantity
►General Instructions:
ThankyouforpurchasingaCabinetsToGoproduct.Youarenowtheproudownerofahighqualityproductdesigned
tofacethetestofdaily useandguaranteeingyourenjoymentformanyyearstocome.
Carefullyreadtheinstructionsbeforestartingtheinstallation.
Duringassembly,pleasefollowallgenerallyacceptedsafetyprocedures.
FailuretoadheretothefollowinginstructionswillinvalidatethewarrantyandCabinetsToGowilldeclineany responsibilityforany
damagescaused.Anyinstallationwhichdoesnotcorrespondtotheinstructionsmayresultin defects,malfunctioningparts,significant
damageand/orinjury.
Beforetheassemblybegins,checkthatallappropriateandrequiredplumbingandelectricalconnectionsexist.
Beforedrilling,makeabsolutelysurethattherearenopipes(gas,water,electricity,heating,etc.)atthedrilling location.CabinetsToGowill
notbeheldresponsibleforfailuretofollowtheseinstructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE
QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT CUSTOMER CARE IMMEDIATELY AT
1-800-CABINET.
►Required tools:
Tools Required: Phillips Screwdriver Optional Tools: Electric Drill Optional Tools: Rubber Mallet
►Hardware Box:
a b cd
Qty 6 Q ty 12 Qty 6 Qty 4
Item Description Qty
AFace Frame 1
BSide Panels 2
CTop Panel 1
DMicrowave Shelf 1
EBack Panel 1
FHardware Box 1
"L"brackets6pcs, 1/2" flat head screws 12pcs,1"flat head screws6pcs, 2" flat head screws 4pcs,
A
C
BD
E
B
e
Qty 4
plastic wall anchors 4pcs
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.

Figure 1
►Instructions:
1. Place face frame (A) face downonaflat soft working surfaceto ensure that the face is not
scratched ordamaged.(Figure1).
2. InsertingPanels:
Inserttoppanel(C)andside panels(B)into face frame(A) (Figure 2)andalignthe camlockconnectors.
Lock the camlockswithascrewdriverbyturningthescrew180°clockwise.(Figure3).
3. Installing the Microwave Shelf: Rotate the cabinet assembly upright, and insert the microwave shelf (D)into the
bottom of the assembled unit. (Figure 4) Tighten all cam locks.
Figure 5 
Figure 3
A
A
Figure 2
B
C
a b cd
Qty 6 Q ty 12 Qty 6 Qty 4
e
Qty 4
Figure 4 
4. Install the back panel (E) onto the back of the assembled unit. Tighten all cam locks. Secure the back panel with provided
screws. (c) Install 3 "L" brackets (a) to the top panel & 3 to the microwave shelf using screws (b). Your Wall Microwave Cabinet
is now completely assembled. (Figure 5) Toinstallthecabinettothe wall youshould use wall mount screws (d) and
anchors (e) if installing directly into drywall.
B
D
Page 3

Page5
► Maintenance
For daily cleaning, use a dry cloth and a soft liquid cleaner.
Never use abrasive cleaners containing acetone, chlorine or strong bleach. Also, do not use tools as scrapers,
metall
ic brushes, and other products which can scratch or tarnish surfaces.
Under no circumstances should you use chrome cleaner on chrome-plated or brass trim, hinges, handles, sockets etc.
Good ventilation i s essential for maintaining the quality and look of this furniture.
Warranty and Customer Care Information
For the most up to date warranty information for your product, please visit our website - www.cabinetstogo.com to get
the specific details. If you have any questions with warranties or to make a claim, please contact Customer Care by email
- [email protected] or call 1-800-CABINET.