Cisco TelePresence DX70 User manual

1
78-21622-01 C0 | JULY 2014 © 2014 Cisco Systems, Inc. All rights reserved.
Cisco DX70
INSTALLATION GUIDE

2
Always use the provided Lite-On PA-1600-2A-LF
power supply (input: 2 A, 100-240 V, 50-60 Hz;
output: 5.0 A, 12.0 V) or FSP075-DMAA1 (input:
1.2 A, 100-240V, 50-60Hz; output: 6.5A, 12.0V)
Optional Accessories
• VESA adapter
User Guides
For user guides and compliance and safety information for this product, go to:
http://www.cisco.com/go/dx-docs
Room Setup
For more information on how to set up your room for the best video experience,
visit the Project Workplace tool at http://www.cisco.com/go/projectworkplace
Accessories
AEthernet cable (2.9 m/ 9.5ft) BPower adapter and regional power cable
CCleaning cloth

3
Connect Cables
1. Pull the foot stand, set the DX70 in an upright position and adjust the angle.
2. Flip the connector cover up to access the connector panel.
3. Connect the Ethernet cable (A) between the network connector
1
and a network
wall socket. Alternatively, you can use a Wi-Fi connection.
4. Connect the provided power adapter and cable (B) between the DX70
2
and a
power socket.
To use the same network wall socket for both your computer and DX70, connect your
computer to the computer network port on the DX70, and the DX70 to the network wall
socket (see step 3).
Computer
network
Network
Kensington
lock
USB
Power
HDMI
in
Service port
21
HDMI
out
3

4
Start the System
1. Push the power button to start up the DX70. The power button’s LED lights up when
the device starts up.
2. Follow the on-screen instructions to set up the system.
For more information on how to set up the system, see the Administrator Guide at
http://www.cisco.com/go/dx-docs
Connect to Computer and Monitor
Connect your computer to the DX70 to enable content sharing and to use it as a monitor
for your computer.
Connect an HDMI cable between the DX70
3
and your computer. You may need an
adapter for the HDMI cable, depending on the connectors available on your computer.
3
The DX70 can be connected to an external monitor via the HDMI out port.

5
Front and Side Panels
Turn the privacy shutter to open and close the camera.
Use the source button to show and hide your computer screen when a computer is
connected to the DX70.
Adjust Camera and Stand
Power button
Speaker
Microphone
Camera privacy shutter
Microphone mute
Volume
USB charging port
Micro-SD card slot
Mini jack 3.5 mm output
You can tilt the camera to adjust the camera angle and to activate the document camera
feature.
Adjust the foot stand to take advantage of the extended tilt of the touch screen.
Source button

6
On our web site you will find an overview of the
worldwide Cisco contacts.
Go to: http://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and
other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party
trademarks mentioned are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. (1110R)