Clarke CS300K Instruction Manual

CAUTION: Do not keep the override keys in the safe itself!
OPERATION & MAINTENANCE
INSTRUCTIONS
LS1014
SAFE
MODEL NO: CS300K
PART NO: 7710170

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE Safe. Before attempting to operate the safe, it is
essential that you read this manual thoroughly and carefully follow all instructions given.
In doing so you can look forward to the safe giving you long and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with
in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
REPLACEMENT KEY
A small label is located on the front of each safe with a key number. The number will
contain several digits. This number must be registered with us in the event you require a
replacement key.
Please complete the registration form at the back of this manual and send it to the
address stated with the form. If you fail to register the safe we will not be able to provide
you with a replacement key.
We recommend that in addition to sending the completed from you remove the label
from the safe and fix it to the space below. Please retain this document for future
reference.
Fix or record the key number here
INSTALLING THE SAFE
The safe should be secured vertically to a wall, cupboard
shelf or to the floor using the expansion bolts (supplied).
• There are 8mm holes on the rear and floor of the
safe for securing to a wall or to the floor.
SPECIFICATIONS
Dimensions (DxWxH) 180 x 280 x 182 mm Weight 4.9 kg
Number of keys supplied 2

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [email protected]
IMPORTANT
In order to be able to obtain a replacement key.
Please detatch and complete this safe registration
form (see reverse), Then return it to:
Clarke International
Product Registration Department
Shrubland Road
London
E10 7RB