Clarke STRONG-ARM CS250D Owner's manual

Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International
reserve the right to change specifications at any time without prior notice.
Electronic Digital Safe
CS250D and CS550D
Part Numbers: 7710155 & 7710160
Model DimensionsHxWxD Capacit Weight
CS250D 250x350x270 mm 0.018m³17.0kg
CS550D 557x368x448mm 0.085m³ 33.0kg
Solid steel safes, have digital electronic lock with mechanical override. Pry
resistant recessed doors with internal hinges, double locking bolts and floor/wall
mounting, using four anchor bolts supplied.
This compact safe is ideal for storing cash and important documents in the
home or office.
Before permanently securing the safe, check carefully that the keys supplied,
are the correct ones for your safe, also check the electronic lock, any defects
should be reported to the Clarke dealer where the safe was originally purchased
as soon as possible.
IMPORTANT
Store the spare keys safely, make a note of the key serial number in case new
keys need to be ordered.
eplacement lock and keys are available from your nearest Clarke dealer.
When ordering, please quote the safe model number.
PARTS & SERVICE TEL: [phone]
or e-mail as follows:
PARTS: Parts clarkeinternational.com
SERVICE: Service clarkeinternational.com

CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is in alid if the product is found to ha e been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
Thank you for purchasing this CLARKE Electronic Digital Safe, which
is designed for use in the home and office, as well as in oats and
caravans etc.
Operation
 Open Safe
The entry code (159) is factory set. To open the safe, enter 159 on the numeric
keypad followed by button B , the green LED will illuminate and the knob can
be rotated clockwise to release the bolts. The door can now be opened.
NOTE: each time a button is pressed an audible beep will sound and the amber
LED will illuminate.
 Close Safe
To close the safe, simply close the door and rotate the knob anticlockwise, the
door locks automatically, test the lock by attempting to turn the knob clockwise.
 Change Entry Code
To change the entry code, open the safe door. Press the red button (Fig. 2), the
amber LED will illuminate, enter the new code on the numeric key pad followed
by button A, a successful change will be confirmed by two audible beeps.
Three beeps means the new code has not been accepted, repeat procedure
again.
NOTE: the entry code can be a maximum of eight digits.
 Key Operation
In the event of battery or electronic failure, the safe can be opened using one
of the two keys supplied.
Carefully remove the override cover by prising open with a thin bladed knife or
similar, once removed the key lock is exposed. Fully insert the key and rotate
EDs
Red Green Amber
Knob Numeric Key Pad
Override Key Cover
anticlockwise, now rotate the knob clockwise to open as before. The door can
be locked again by reversing the procedure.
 Battery Replacement
To fit new batteries, open the safe, the battery compartment is found on the
back of the door. Slide the cover off in direction indicated, replace batteries
observing correct polarity, refit cover and test before closing door.
NOTE: When the Red and Amber LEDs are both illuminated, this indicates that
the batteries need replacing.
IMPORTANT
Never leave the keys inside the safe
Battery Compartment
Red Button
Fig. 1
Fig. 2
Unlockock