Clarke STRONG-ARM CS300K Instruction Manual

CAUTION: Do not keep the override keys in the safe itself!
OPERATION & MAINTENANCE
INSTRUCTIONS
DL0323
SAFE
MODEL NO: CS300K
PART NO: 7710170

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE Safe. Before attempting to operate the safe, it is
essential that you read this manual thoroughly and carefully follow all instructions given.
In doing so you can look forward to the safe giving you long and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with
in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
REPLACEMENT KEY
A small label is located on the front of each safe with a key number. The number will
contain several digits. This number must be registered with us in the event you require a
replacement key.
Please register your safe on the website listed on page 3. If you fail to register the safe
we will not be able to provide you with a replacement key.
We recommend that in addition to registering you remove the label from the safe and
fix it to the space on page 3. Please retain this document for future reference.
INSTALLING THE SAFE
The safe should be secured vertically to a wall,
cupboard shelf or to the floor using the
expansion bolts (supplied).
• There are 8mm holes on the rear and
floor of the safe for securing to a wall or
to the floor.
SPECIFICATIONS
Dimensions (DxWxH) 180 x 280 x 182 mm Weight 4.9 kg
Number of keys supplied 2

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
IMPORTANT
Safe Registration
Please visit
www.clarkeinternational.com/safe-registration/
or scan the QR code below
and register your new Clarke Safe
Please identify the key number before your safe
is installed. If you fail to register and subsequently
lose your key, we will be unable to provide you
with a replacement. It is therefore in your own
best interest to register immediately.
Record the key number here:
____________________________
NOTE: DO NOT store this manual or spare key
in your safe

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]