Cleveland MKET-20-T User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
MIXER KETTLES
MIXER KETTLE, ELECTRIC
FLOOR TYPE, LEVER TILT
2/3 STEAM JACKETED
MODELS:cMKET-20-T
Cleveland Standard Features
nSolid State Temperature Control (±1°F) for perfect
simmering
nSolid State Low Water Safety Control
nSteam jacket filled with treated water, venting and/or refilling is
not required
n50 psi Safety Valve mounted under kettle to avoid
tampering
nNo Water Gauge required
nRear mounted Pressure/Vacuum Gauge and Pressure Relief
Valve protected by Stainless Steel Bracket
nInfinitely variable speed for all conditions; Scraper from 0-70
rpm, Agitator from 0-210 rpm
nRemovable (without tools) Nylon Blades scrape entire
Jacketed surface
n3/4 Horsepower D.C. Timing Belt
nSafety device prevents high speed starts
nMixer stop when Bridge is lifted
nAgitator and Scraper are bayonet mounted for easy removal
nTotally enclosed, balanced, 10 gauge Stainless Steel Mixer
Bridge
nKettle and all exterior surfaces are Stainless Steel
nDouble Pantry Faucet Standard
nLevel adjustable feet (flanged for bolting)
nLarge Pouring Lip
nGallon markings on Scraper Shaft
nStandard 120/208-240 volts, 60 Hz, 3 phase, 4 wire
nTypical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
pCovers (MTP20)
pFood Strainer (FS-20)
pFlow Diverter (FD)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
Shall be CLEVELAND, Model MKET-20-T,floor type lever tilt, 20 gallon, elec-
tric mixer kettle with permanently filled Steam Jacket; 50 psi Jacket Rating
and Safety Valve, Solid State Temperature (±1°F) and Low Water Safety
Controls, rear mounted Combination Pressure / Vacuum Gauge, infinitely
variable Speeds. 3/4 H.P. Timing Belt Drive, Bayonet Mounted Agitator and
Scraper with removable blades, safety device prevent high speed starts,
mixing stops when bridge is lifted. Kettle and all exterior surfaces are
Stainless Steel. Double PantryFaucet standard.
pDraw-offBrush (DB) p24 oz. Ladle (KL)
pType 316 Stainless Steel Interior for high acid food products
(316-20G)
pWater Meter (GMF or LMF) Wall Mount or on Stand (SWM)
pHigh wattages (HW) and special voltages (VOS)
Short Form Specifications
SECT. XI PAGE 3
0707

SECT. XI PAGE 4
0707
Litho in USA
(NOT TO SCALE)
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.