Connects2 CTULR04 User manual

www.connects2.com
INSTRUCTION MANUAL
CTULR04
LAND ROVER INFODAPTER

www.connects2.com
2
ABOUT
The Connects2 Infodapter for Land Rover vehicles provides retention of the vehicle’s
OEM steering wheel controls, amplier, visual park aid and time/date change.
Land Rover Freelander (II) 2006 - 2014
DIP SWITCH SETTINGS
See Fig 1.
Up = Off, Down = On
1: On = Pioneer Head Units. Off = All Other Head Units
2: Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).
3: Resets the display settings back to default. If the display settings have been
manipulated in a way that it is no longer possible to make adjustments, change the
DIP switch #3 from Off to On and back. This will reset the screen settings to the factory
defaults. During this procedure the screen background will change to red. While the
background is red, no settings can be made.
4: Not applicable
Interface Connections
Fig 1.
1 234
DIP ON
Reverse Camera output
to head unit and reverse
camera input from
optional camera
Power Harness Steering Wheel
Remote control
connector to
head unit
Dip Switches Not Used
Fig 2.

www.connects2.com 3
1. Mode
2. Track Up/Down
3. Volume +/-
4. Pick Up/Hang Up
Fig 3.
Steering Wheel Controls
Conguration Menu
To access the menu, push and hold the Mode button for 2 seconds (Fig. 3).(if no speech
button, pick up can be used) This will enable the conguration menu. To navigate
through the menu options use the Track Up/ Track Down buttons. To select a menu
option, push the Mode button once.
Conguration Menu
Screen Size/Position
Picture Settings
Vehicle Settings
Preferences
Language
Version
< Back
Screen Size/Position
Horizontal Size
Horizontal Position
Vertical Size
Vertical Position
< Back
•
o Screen Size/Position -
Make sure all 4 corner markers
are touching the corners of the
aftermarket head unit display.
1
2
3
4

www.connects2.com
4
Conguration Menu...continued
Legal Information
Please consult the relevant road trafc laws governing the country in which this product is being operated.
No liability is accepted for material damage, loss or personal injury, directly or indirectly, from installation and
operation of this product. This product should only be operated when safe to do so.
Preferences
Park Assist Version
Camera Connected
Park Brake Source
Restore factory settings
< Back
o Preferences -
Driver Position - Select Left or Right depending
upon vehicle conguration.
Park Brake Source - Set to Speed, Brake or
Always On.
Restore factory settings - Reverts all
Infodapter settings to factory defaults.
(This does not restore vehicle settings)
Picture Settings
Brightness
Contrast
Saturation
<Back
o Picture Settings -
Adjust Brightness, contrast and
colour saturation.
Vehicle Settings
Time/Date
< Back
o Time/Date -
Adjust the vehicle’s Time/Date
settings