Connects2 CTQIAU03 Operation manual

CTQIAU03| CTQIAU06 | CTQIBM03 | CTQIBM05 | CTQIBM06 | CTQIHD04 |
CTQIJG01 | CTQILR01 | CTQILR02 | CTQILR03 | CTQILR04 | CTQILR05 | CTQILX02 |
CTQILX04| CTQIMC04 | CTQIMC05 | CTQIPO01 | CTQITY04 | CTQITY05 | CTQIVL01
Car Specic Wireless Charging Solutions
The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This
instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the
vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.
DISCLAIMER
CTQI-VARIOUS_en-GB_v1
Installation/User Guide
Installation
www.connects2.com
User Guide
This wireless charging solution is designed
to be installed in the storage box or armrest
box locations. The illustrations are for refer-
ence only and installation position for each
vehicle will vary.
The product is supplied with a cable to
connect to the vehicle’s 12V power supply.
Due to the nature of this installation, help
from a tting professional is recommended
to safely install the product Recommended storage box
location
1. Turn on the vehicle ignition
2. The LED will ash white then blue to indicate power-on
3. The LED will hold white to indicate standby
4. Put a wireless charging enabled smartphone or device onto the pad
5. The LED will turn blue to indicate that charging is in progress
6. Once the device is fully charged, the LED will ash blue continuously
Notes for best performance
• Ensure that the centre of the smartphone is lined up with the centre of the wireless charging pad for the fastest charge
• Ensure that no metal objects are placed between the device and the phone during use. This will cause the device to enter
“foreign object detection mode” and all charging will pause. The LED will ash alternating blue and white to indicate this.
Specications
• Charging Standard WPC - Qi V1.2.4
• Transmission Frequency 110kHz～205kHz
• Input Voltage 9V~16V
• Input Current 1.5A (max)
• Output 10W/ 7.5W/ 5W
• Effective Distance 0mm～- 6mm
• Coil Quantity 3 coils
• Working Temperature -20～～+65～
• Storage Temperature -40～～+85～
• Operating Humidity 10% to 70% RH
• Storage Humidity～ 10% to 80% RH

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This
instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the
vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.
DISCLAIMER
CTQI-VARIOUS_en-GB_v1
www.connects2.com
Specications
CTQIUV03
Universal Wireless Charging Pocket
Quick Start Guide
4
• Charging Standard WPC - Qi V1.2.4
• Transmission Frequency 110kHz～205kHz
• Input Voltage 9V~16V
• Input Current 1.5A (max)
• Output 10W/ 7.5W/ 5W
• Effective Distance 0mm～- 6mm
• Coil Quantity 3 coils
• Working Temperature -20～～+65～
• Storage Temperature -40～～+85～
• Operating Humidity 10% to 70% RH
• Storage Humidity～ 10% to 80% RH