manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Cornwell Tools
  6. •
  7. Tools
  8. •
  9. Cornwell Tools CAT-100PFT User manual

Cornwell Tools CAT-100PFT User manual

CAT-100PFT 1 Rev. 04/02/02
Operating Instructions • Warning Information • Parts Breakdown
CAT-100PFT
8MM
Punch Flange
Tool
Punch Hole Size . . . . . . . . . . . . . . . . . . .8MM
Air Inlet . . . . . . . . . . . . . . . . . . . . . . .1/4 NPT
Hose Size . . . . . . . . . . . . . . . . . . . . . .3/8" I.D.
Air Pressure . . . . . . . . . . . . . . . . . . . . . .90 PSI
Air Consumption . . . . . . . . . . . . . . . . .4 CFM
Length . . . . . . . . . . . . . . . . . . . . . . . . . . .10"
Net Weight . . . . . . . . . . . . . . . . . . .3-1/2 Lbs.
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
CAT-100PFT 2 Rev. 04/02/02
WARNING - FOLLOW THESE RULES FOR SAFE OPERATION!
This Instruction Manual Contains Important
Safety Information.
Read THIS INSTRUCTION MANUAL Care-
fully and understand ALL INFORMATION
Before Operating This Tool.
• Always operate, inspect and maintain this
tool in accordance with American
National Standards Institute Safety Code
of Portable Air Tools (ANSI B186.1)
and any other applicable safety codes
and regulations.
• For safety, top performance and maximum
durability of parts, operate this tool at 90
psig 6.2 bar max air pressure with 3/8"
diameter air supply hose.
• Always wear impact-resistant eye and
face protection when operating or
performing maintenance on this tool. Al-
ways wear hearing protection when using
this tool.
• High sound levels can cause permanent
hearing loss. Use hearing protection as
recommended by your employer or
OSHA regulation.
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel
must be physically able to handle the
bulk, weight and power of this tool.
• Air under pressure can cause
severe injury. Never direct air at yourself
or others. Always turn off the air supply,
drain hose of air pressure and detach
tool from air supply before installing,
removing or adjusting any accessory
on this tool, or before performing
maintenance on this tool. Failure to do
so could result in injury. Whip hoses can
cause serious injury. Always check for
damaged, frayed or loose hoses and
fittings, and replace immediately. Do not
use quick detach couplings at tool. See
instructions for correct set-up.
• Air powered tools can vibrate in use.
Vibration, repetitive motions or
uncomfortable positions over extended
periods of time may be harmful to your
hands and arms. Discontinue use of tool
if discomfort, tingling feeling or pain
occurs. Seek medical advice before
resuming use.
• Place the tool on the work before starting
the tool.
• Slipping, tripping and/or falling while
operating air tools can be a major
cause of serious injury or death. Be
aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and
firm. Do not overreach when operating
the tool.
• Anticipate and be alert for sudden
changes in motion during start up and
operation of any power tool.
• Do not carry tool by the hose. Protect the
hose from sharp objects and heat.
• Keep away from rotating end of tool.
Do not wear jewelry or loose clothing.
Secure long hair. Scalping can occur if
hair is not kept away from tool and
accessories. Choking can occur if
neckwear is not kept away from tool
and accessories.
• Do not lubricate tools with flammable or
volatile liquids such as kerosene, diesel or
jet fuel.
• Don't force tool beyond its rated capacity.
• Do not remove any labels. Replace
damaged labels.
CAT-100PFT 3 Rev. 04/02/02
Nipple
AIR SUPPLY
Tools of this class operate on a wide range of air
pressures. It is recommended that air pressure of these
tools measure 90 PSI at the tool while running free.
Higher pressure and unclean air will shorten the tool’s
life because of faster wear and may create a hazardous
condition.
Water in the air line will cause damage to the tool.
Drain the air tank daily. Clean the air inlet filter screen
on at least a weekly schedule. The recommended hook-up
procedure can be viewed in Figure 1.
The air inlet used for connecting air supply has standard
1/4" NPT American Thread.
Line pressure should be increased to compensate for
unusually long air hoses (over 25 feet). Minimum hose
diameter should be 1/4" I.D. and fittings should have
the same inside dimensions
LUBRICATION
Lubricate the tool daily with a quality grade of air tool
oil. If no air line oiler is used, run a teaspoon of oil
through the tool. The oil can be squirted into the tool
air inlet or into the hose at the nearest connection to
the air supply, then run the tool. A rust inhibitive oil is
acceptable for air tools.
WARRANTY
Cornwell warrants its air tools for a period of 1 year to
the consumer. We will repair any air tool covered
under this warranty which proves to be defective in
material or workmanship during the warranty period.
In order to have your tool repaired, return the tool
to any Cornwell Authorized Warranty Center, freight
prepaid. Please include a copy of your proof of purchase
and a brief description of the problem. The tool will
be inspected and if any part or parts are found to be
defective in material or workmanship, they will be
repaired free of charge and the repaired tool will be
returned to you freight prepaid.
This warranty gives you specific rights. You may also
have other rights which vary from state to state.
The foregoing obligation is Cornwell’s sole liability
under this or any implied warranty and under no
circumstances shall Cornwell be liable for any incidental
or consequential damages.
Note: Some states do not allow the exclusion or
limitation of incidental or consequential damages so
the above limitation or exclusion may not apply to you.
Figure 1
CAT-100PFT 4 Rev. 04/02/02
PARTS BREAKDOWN - CAT-100PFT
Ref. # Item # DESCRIPTION QTY
1 83701A Piston 1
2 83702 Packing 1
3 83703 Back-Up Ring 1
4 83704 O-Ring 1
5 83705 Cylinder 1
6 83706 O-Ring 1
7 83707 Oil Plug 1
8 83708 Back-Up Ring 1
9 83709 O-Ring 1
10 83710 Air Inlet 1
11 83711 Spring 1
12 83712 O-Ring 3
13 83713 Back-Up Ring 1
14 83714 O-Ring 2
15 83715 O-Ring 2
16 83716 Piston 1
17 83717 Spring 1
18 83718 Cylinder 1
19 83719 Piston Rod 1
20 83720 Washer 2
21 83721 O-Ring 1
22 83722 Piston 1
23 83723 Lock Nut 1
Ref. # Item # DESCRIPTION QTY
24 83724 Air Valve Body 1
25 83725 O-Ring 1
26 83726 Spring 1
27 83727 Air Valve 1
28 83728 Plug 1
29 83729 Spring 1
30 83730 Valve Cover 1
31 83731 O-Ring 1
32 83732 Trigger 1
33 83733 Pin 1
34 83734A Punch 1
35 278CSS Cup Spring Set 1
36 83736A Cover 1
37 83737A Guide Sleeve 1
38 83738A Punching Die 1
39 83739A Anvil Bed 1
40 83740A Punching Die Bed 1
41 83741 Packing 1
42 83742 Screw 1
43 83743 Screw 1
44 83744A Washer 1
45 83745B Blue Plastic Wrap 1

Other Cornwell Tools Tools manuals

Cornwell Tools CSE-1100ESB User manual

Cornwell Tools

Cornwell Tools CSE-1100ESB User manual

Cornwell Tools GG-CSGGA User manual

Cornwell Tools

Cornwell Tools GG-CSGGA User manual

Cornwell Tools CTGSSAGG User manual

Cornwell Tools

Cornwell Tools CTGSSAGG User manual

Cornwell Tools CSEPR4TA User manual

Cornwell Tools

Cornwell Tools CSEPR4TA User manual

Cornwell Tools CAT3250AHMV User manual

Cornwell Tools

Cornwell Tools CAT3250AHMV User manual

Cornwell Tools CAT4250AHBP User manual

Cornwell Tools

Cornwell Tools CAT4250AHBP User manual

Cornwell Tools CAT650AS User manual

Cornwell Tools

Cornwell Tools CAT650AS User manual

Cornwell Tools CAT3PST User manual

Cornwell Tools

Cornwell Tools CAT3PST User manual

Cornwell Tools CAT820 User manual

Cornwell Tools

Cornwell Tools CAT820 User manual

Cornwell Tools CAT-250AH User manual

Cornwell Tools

Cornwell Tools CAT-250AH User manual

Cornwell Tools CSE1100 User manual

Cornwell Tools

Cornwell Tools CSE1100 User manual

Cornwell Tools CSEPR4T User manual

Cornwell Tools

Cornwell Tools CSEPR4T User manual

Cornwell Tools blue POWER CAT851XLR User manual

Cornwell Tools

Cornwell Tools blue POWER CAT851XLR User manual

Cornwell Tools CAT700MB User manual

Cornwell Tools

Cornwell Tools CAT700MB User manual

Cornwell Tools CSE-1000 User manual

Cornwell Tools

Cornwell Tools CSE-1000 User manual

Cornwell Tools CAT120 User manual

Cornwell Tools

Cornwell Tools CAT120 User manual

Cornwell Tools CAT850XLR User manual

Cornwell Tools

Cornwell Tools CAT850XLR User manual

Cornwell Tools CAT5500HD User manual

Cornwell Tools

Cornwell Tools CAT5500HD User manual

Cornwell Tools CATPR14 User manual

Cornwell Tools

Cornwell Tools CATPR14 User manual

Cornwell Tools CAT-3190AH User manual

Cornwell Tools

Cornwell Tools CAT-3190AH User manual

Cornwell Tools CAT800FR User manual

Cornwell Tools

Cornwell Tools CAT800FR User manual

Cornwell Tools CAT-2PST Product manual

Cornwell Tools

Cornwell Tools CAT-2PST Product manual

Cornwell Tools CTGCSGGA Product manual

Cornwell Tools

Cornwell Tools CTGCSGGA Product manual

Cornwell Tools Pro Series User manual

Cornwell Tools

Cornwell Tools Pro Series User manual

Popular Tools manuals by other brands

Aliaxis Friatec FWSG 900L Operating	 instruction

Aliaxis

Aliaxis Friatec FWSG 900L Operating instruction

MountzPro MountzProDT135 owner's manual

MountzPro

MountzPro MountzProDT135 owner's manual

MSW Motor Technics MSW-OD-10 user manual

MSW Motor Technics

MSW Motor Technics MSW-OD-10 user manual

Greencut MANGUERA instruction manual

Greencut

Greencut MANGUERA instruction manual

Optimum BF20 L Vario Assembly and maintenance instructions

Optimum

Optimum BF20 L Vario Assembly and maintenance instructions

BEA 92/25-553SPREIZ Operator's manual

BEA

BEA 92/25-553SPREIZ Operator's manual

Lankota CK1100 owner's manual

Lankota

Lankota CK1100 owner's manual

NPK NPH-3500 instruction manual

NPK

NPK NPH-3500 instruction manual

Geovent GTE-250 instruction manual

Geovent

Geovent GTE-250 instruction manual

Leigh B975 user guide

Leigh

Leigh B975 user guide

MAULE MX-7-420 TURBO-PROP Maintenance manual

MAULE

MAULE MX-7-420 TURBO-PROP Maintenance manual

Sealey VSE4779 instructions

Sealey

Sealey VSE4779 instructions

Nitta ATC XChange XC400 User and maintenance manual

Nitta

Nitta ATC XChange XC400 User and maintenance manual

Cembre HT131LN-C Operation and maintenance manual

Cembre

Cembre HT131LN-C Operation and maintenance manual

Wilton 600S quick start guide

Wilton

Wilton 600S quick start guide

SATA 98001 user manual

SATA

SATA 98001 user manual

Nederman Hose Reel H20 user manual

Nederman

Nederman Hose Reel H20 user manual

Parkside PDMH 4500 B5 Translation of the original instructions

Parkside

Parkside PDMH 4500 B5 Translation of the original instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.