dams NERPL User manual

03.06.2019
1 2 3 4
1
NERPL
RH Ergonomic Panel End Legs
Newton Desking
RM-INS070

1,2,3...
TOOLS REQUIRED
FOR ASSEMBLY
DON'T STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
KEEP FITTINGS AWAY
FROM CHILDREN
2

3
Please check that you have all the components!
4
800mm LH Panel Leg
1
Modesty Panel
Desktop
Please check that you have all the hardware!
RM-ALK01
4mm Allen Key
RM-FRL19
Adjustable Foot Dia 25mm
RM-BLT07
M6x34mm Minifix Bolt
RM-CFM04
Confirmat Screw 70mm (Silver)
x4
600mm RH Panel Leg
2 3
Side Panel
Corner Post Leg
RM-PIN04
24mm Woodfix Pin
x2
RM-FRL10
40x20mm M8 Threaded Ferrule
x1
RM-PAR03
M6 Brass Insert
RM-CAM03
15mm Minifix Cam
RM-NUT04
M8 Gesipa Insert
RM-PAR05
Nylon M6x10 Socket
RM-SCR37
4x20mm Wood Screw
x1 x2 x2 x6 x4
x1 x6 x5

4
1
Step 1
Place your desktop face down onto
a clean dry surface and knock the
inserts into the pre drilled holes on
the underside of the desktop.
RM-PAR03
M6 Brass Insert
RM-PAR05
Nylon M6x10 Socket
x2
x2

5
2
Step 2
Screw in the woodfix pins into
the modesty panel. Ensure
they are screwed into the RH
side of the panel.
RM-CAM03
15mm Minifix Cam
x2
3
Step 3
Insert the minifix cams into the side
panel. Ensure they are inserted into
the LH side of the panel and that the
fitting is pushed all the way down and
that the arrow guideline is aligned with
the hole in the edge of the panel.
RM-PIN04
24mm Woodfix Pin
x2

6
5
Step 5
Screw the 25mm adjustable feet into
the bottom of the panel end leg.
Repeat for both legs.
4
Step 4
Knock in the gesipa inserts
into the holes on the bottom
edge of the panel end leg.
Repeat for both legs.
RM-FRL19
Adjustable Foot Dia 25mm
x4
RM-NUT04
M8 Gesipa Insert
x4

7
Step 7
Insert the threaded ferrule
into the end of the steel
corner post leg.
No tools should be used for
this step, do not hit with a
hammer as this will result in
damage to the plastic fitting.
6
Step 6
Insert the minifix cams into
the panel end leg. Ensure the
fitting is pushed all the way
down and that the arrow
guideline is aligned with the
hole in the edge of the panel.
Repeat for both legs.
7
RM-CAM03
15mm Minifix Cam
x4
8
RM-FRL19
Adjustable Foot Dia 25mm
RM-FRL10
40x20mm M8 Threaded Ferrule
x1 x1
Step 8
Screw the 25mm adjustable
foot into the threaded ferrule.

8
10
Step 10
Place the LH Leg onto the
desktop ensuring that the
cam fittings engage over the
minifix bolts. Once in place
tighten the cams to lock the
panel end leg into place.
9
Step 9
Screw the M6x34mm minifix
bolts into the inserts that
you inserted in step 1.
RM-BLT07
M6x34mm Minifix Bolt
x4

8
12
Step 12
Line the corner post leg up with the modesty
panel ensuring the pre drilled holes are
aligned. Attach the leg to the modetsy panel
using the 70mm confirmat screws.
11
Step 11
Line the modesty panel up with the
RH panel end leg ensuring the pre
drilled holes are aligned. Attach
the leg to the modesty panel using
the 70mm confirmat screws.
RM-CFM04
Confirmat Screw 70mm (Silver)
x2
RM-CFM04
Confirmat Screw 70mm (Silver)
x2

8
14
Step 14
Place the LH panel end leg
onto the desktop ensuring
that the cam fittings engage
over the minifix bolts.
13
Step 13
Position the side panel onto
the modesty panel ensuring
that the cam fittings engage
over the woodfix pins. Once in
place tighten the cams to lock
the side panel into place.

8
16
Step 16
Tighten the cams to lock the
panel end leg into place.
15
Step 15
Attach the LH panel end leg
to the modesty panel using
the 70mm confirmat screws.
RM-CFM04
Confirmat Screw 70mm (Silver)
x2

8
17
Step 17
Fix the corner post leg to
the desktop using the 20mm
wood screw.
RM-SCR37
4x20mm Wood Screw
x1
Matching adhesive caps are provided to cover any visible screw heads or cam fittings.