dams SHAW-K User manual

+
x4
x1
x1 x1
A B C
D
ab
c
880MM
700MM
375MM
120-505MM
880MM
415MM
308MM
3-15KG
Max
Max:
2KG
Technical Data Table cover size:
120-505mm
3~15Kg
Loading range
Height adjustment range
Please do not exceed the
maximum WARNING bearing weight
WARNING
>950mm
>610mm
Accessory Package List
No. Spare part No. Spare part No. Spare part
No. Spare part
TOOLS
ASSEMBLY STEP 1
Attention
Please place the product properly
according to size of it, or it may
harm or cause damage.
Please take the packaging carton apart,
take out the product and place it one the table
Push the keyboard tray connector
into the slot and lock it
ASSEMBLY STEP 2
When removing the keyboard tray,
please open the wrench and remove it.
Item No.: SHAW-K
Installation guide

2
arning
Please do not put hands near the supporting
bars, as they change during adjusting and
may hurt you.
Based on the actual usage, press the
handle on one side, and adjust the
workstation to the proper height
Please make sure all installed equipments
are on the table, and not sticking out of the
edge, or it may harm or cause damage.
Please put the devices onto the
top of the workstation.
are ul
1
Cable
Adhesive buckle helps to make the
cables tidy and clean. Please leave
enough length of cable for height
adjustment function, otherwise it
may cause unexpected lost.
are ul
Use the cable management
to guide and bundle the cables
Nylon ties
arning
Please do not put hands near the supporting bars, as
they change during adjusting and may hurt you.
Please ma e sure all installed e uipments
are on the table, and not stic ing out o
the edge, or it may harm or cause damage.
Please lea e enough length o abl or
height adjustmen unction, other ise it
may cause une pected lost.
ttention
ttention
Please first adjust it to the highest,
then remove equipment to avoid
harm or damage.
ttention
Please move it by two persons, or
parts may collide and cause damage.
ttention