dams Maestro 25 User manual

MCM25W
Wave Desk Cable Managed Leg Frame
10.01.2020
1 2 3
1
RIGHT HAND WAVE
DESK SHOWN
Maestro 25 Desking

1,2,3...
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
KEEP FITTINGS AWAY
FROM CHILDREN
2

Please check that you have all the components!
3
3
2 x Outer Leg Covers
2 x Cable Channels
800mm Leg Frame
1 2
Modesty Panel
Desktop
Please check that you have all the hardware!
RM-ALK01
4mm Allen Key
RM-FRL20
Adjustable Foot Dia 38mm
Cable Tie
RM-BLT05
Connect Bolt M6x50mm
RM-CFM04
Confirmat Screw 70mm (Silver)
x1 x4
x6x4
x4
M6x10mm Thumbscrew
x12
RM-PAR05
Nylon M6x10 Socket
x4
990mm Leg Frame

4
2
Step 2
Screw the 25mm adjustable
feet into the bottom of both
leg frames.
1
Step 1
Place your desktop face down onto a
clean dry surface and knock in the
nylon inserts into the pre drilled holes
on the underside of the desktop.
RM-PAR05
Nylon M6x10 Socket
x4
RM-FRL20
Adjustable Foot Dia 38mm
x4

5
4
Step 4
Attach the modesty panel to the leg using
the 70mm confirmat screws.
3
Step 3
Attach the 800mm leg frame to the desktop
using the M6x50mm connect bolts.
RM-CFM04
Confirmat Screw 70mm (Silver)
x2
RM-BLT05
Connect Bolt M6x50mm
x2

6
6
Step 6
Attach the leg frame to the desktop using the
M6x50mm connect bolts.
5
Step 5
Place the RH leg frame onto the desktop
and attach to the modesty panel using the
70mm confirmat screws.
RM-BLT05
Connect Bolt M6x50mm
RM-CFM04
Confirmat Screw 70mm (Silver)
x2
x2

8
Step 8
Once the cable channel is in
place fix it into position using
the M6x10mm thumbscrews.
Repeat this step for both legs.
7
Step 7
Insert the cable channel into the
opening between the uprights.
Repeat this step for both legs.
7
M6x10mm Thumbscrew
x8
Cable Channel
x2

8
11
Step 11
Attach the cable covers using the M6x10mm
thumbscrews. Repeat this step for both legs.
9
Step 9
Feed any cables up through the cable channel
from the inside of the leg. If needed use the
cable ties to fasten them to the cable channel.
10
Step 10
Insert the cable cover into the opening between
the uprights. Repeat this step for both legs.
Cable Tie
x6
Cable Cover
x2
M6x10mm Thumbscrew
x4