dams Flux FL-IS1 User manual

ASSEMBLY
INSTRUCTIONS
Flux
Shelf Panels
1
2 3 456
7 8 9 10 11 12
Pack 1:
1x Shelf Panel
16-12-2021
Flux - Shelf Panels
FL-IS1 - FL-IS2 - FL-TS1 - FL-TS2

1,2,3...
**mm
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
**mm
KEEP FITTINGS AWAY
FROM CHILDREN

Please check that you have all the panels
1 2 3 456
7 8 9 10 11 12
PACK 1:
1 x Shelf
Knock-in Insert
Size PCS
13mm 4
378 x 378mm = FL-IS1
778 x 378mm = FL-IS2
420 x 420mm = FL-TS1
820 x 420mm = FL-TS2
FITTINGS SUPPLIED
FL-IS1 FL-IS2
Please check that you have all the ttings
Screw-in Pin
Size PCS
13mm 4
FL-TS1 FL-TS2

Insert the 4x nylon knock-in inserts
into the holes located on the
underside of the base.
FLUX SHELF ASSEMBLY
1
Step 1
2
Step 2
Unpack your new Flux shelf
panel and please recycle all
packaging.
3
Step 3
Screw the 4x M4 steel pins into the
nylon inserts.

4
Step 4
Position the shelf into the frame
as shown

ASSEMBLY
INSTRUCTIONS
Flux
Cubby Units
1
2 3 456
7 8 9 10 11 12
Pack 1:
1x Top, Base &
Side Panels
16-12-2021
Flux - Cubby Units
FL-CB1 - FL-CB2 - FL-CS1

1,2,3...
**mm
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
**mm
KEEP FITTINGS AWAY
FROM CHILDREN

Please check that you have all the panels
1 2 3 456
7 8 9 10 11 12
PACK 1:
1 x Cubby
Conrmate Screw
Size PCS
50mm 6
Knock-in Insert
Size PCS
13mm 4
378 x 378mm = FL-CB1
778 x 378mm = FL-CB2
378 x 189mm = FL-CS1
FITTINGS SUPPLIED
FL-CB1
FL-CS1
FL-CB2
Please check that you have all the ttings
Knock-in Dowel
Size PCS
36mm 6
Screw-in Pin
Size PCS
13mm 4

Insert the 6x dowels into the side
panels, and tap gently in with a
hammer / mallet.
FLUX CUBBY ASSEMBLY
1
Step 1
2
Step 2
Unpack your new cubby
unit and please recycle all
packaging.
3
Step 3
Insert the 4x nylon knock-in inserts
into the holes located on the
underside of the base.

4
Step 4
Position the sides underneath
the base panel
5
Step 5
Turn-over the cubby and place
the top panel and tap in place.
6
Step 3
Locate the cubby into the frame
and from the underside screw in
the 4x M4 steel pins.
Locate and tighten the 6x
conrmat screws clockwise

ASSEMBLY
INSTRUCTIONS
Flux
Planter Units
1
2 3 456
7 8 9 10 11 12
Pack 1:
1x Base & Side
Panels
17-12-2021
Flux - Planter Units
FL-PL1 - FL-PL2

1,2,3...
**mm
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
**mm
KEEP FITTINGS AWAY
FROM CHILDREN

Please check that you have all the panels
1 2 3 456
7 8 9 10 11 12
PACK 1:
1 x Planter
Conrmat Screw
Size PCS
50mm 10
Knock-in Insert
Size PCS
13mm 4
378 x 378mm = FL-PL1
778 x 378mm = FL-PL2
FITTINGS SUPPLIED
FL-PL1 FL-PL2
Please check that you have all the ttings
Knock-in Pin
Size PCS
24mm 8
Screw-in Pin
Size PCS
13mm 4
Wooden Dowel
Size PCS
6 x 30mm 8

Insert the 8x dowels into the side
panels, and tap gently in with a
hammer / mallet.
FLUX PLANTER ASSEMBLY
1
Step 1
2
Step 2
Unpack your new Flux planter
unit and please recycle all
packaging.
3
Step 3
Insert the 8x knock-in pins into the
holes located on the side panels as
shown.

4
Step 4
Align the pins in the sides to the
facia panels and slot in place
(ensure the cam arrow is facing
the panel edge)
5
Step 5
Insert the 4x knock-in inserts
into the holes located on the
base panel as shown.
6
Step 6
Locate and align the xing holes
on the base panel to the sides &
facias and ax with the comrmat
screws as shown.
Once both panels are
positioned, turn the minix
cam clockwise to tighten
to secure.

4
Step 4
Screw the 4x M4 steel pins into
the inserts as shown.
5
Step 5
Turn-over the planer and place
on on top of the desired frame.
6