dams SLAB 25 SLBT1290 User manual

SLBT1290 / SLBT1790
SLAB 25 DINING TABLE
25.03.2019
1 2
1

1,2,3...
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
KEEP FITTINGS AWAY
FROM CHILDREN
2

Please check that you have all the panels!
3
1
Please check that you have all the hardware!
Furniture Connector Pin
RM-PIN01
QUANTITY - 10
35mm Maxifix Cam
QUANTITY - 8
55mm Maxifix Pin
QUANTITY - 8
M8 Low Profile Adjustable Foot
RM-FRL36
QUANTITY - 4
M8 Gesipa Insert
RM-NUT04
QUANTITY - 4
6mm Allen Key
QUANTITY - 1
OR
1200mm TABLE 1700mm TABLE
RM-WM25-TOP415 (Without 80mm Hole)
RM-WM25-TOP416 (With 80mm Hole)
RM-WM25-TOP417 (Without 80mm Hole)
RM-WM25-TOP418 (With 80mm Hole)
RM-WM25-BAC129RM-WM25-BAC128
RM-WM25-BAC129RM-WM25-BAC128
2
1
RM-WM25-LGP071 RM-WM25-LGP071

4
2
Step 2
Screw in the connector pins
into the pre drilled holes on
the panel. Ensure the screw
is inserted correctly as per
diagram B. Repeat for both
braces.
1
Step 1
Insert the maxifix cams into the
pre drilled holes on the support
brace. The cam should be
inserted as per diagram A.
Repeat for both braces.
û
ü
35mm Maxifix Cam
Ensure the arrow on
this fitting is aligned
with the hole that is
drilled on the edge of
the panel.
35mm Maxifix Cam
QUANTITY - 8
û
ü
Furniture Connector Pin
Ensure this pin is correctly inserted
into the panel. The flat rim of this pin
should sit against the edge of the
panel.
Furniture
Connector Pin
QUANTITY - 4
Diagram A
Diagram B
û
Incorrect - This has been overtightened and you can
no longer see the rim of the screw.
Correct - This has been inserted correctly.
The rim sits perfectly against the face of the panel.
Incorrect - This hasn't been tightened
enough and you can no see a visible gap
between the rim and the panel.

5
4
Step 4
Screw the adjustable feet into
the bottom of the leg panel.
Repeat for both legs.
3
Step 3
Knock in the gesipa inserts
into the holes on the bottom
edge of the leg.
Repeat for both legs.
M8 Low Profile Adjustable Foot
RM-FRL36
QUANTITY - 4
M8 Gesipa Insert
RM-NUT04
QUANTITY - 4

6
6
Step 6
Screw the maxifix pins into
the pre drilled holes on the
leg panels, ensure they are
screwed in fully so no
thread is left visible.
Repeat for both legs.
5
Step 5
Screw in the connector pins
into the pre drilled holes on
the leg panel. Ensure the
screw is inserted correctly
as per diagram C.
Repeat for both legs. û
ü
Furniture Connector Pin
Ensure this pin is correctly inserted
into the panel. The flat rim of this pin
should sit against the edge of the
panel.
Furniture
Connector Pin
QUANTITY - 6
Diagram C
û
Incorrect - This has been overtightened and you can
no longer see the rim of the screw.
Correct - This has been inserted correctly.
The rim sits perfectly against the face of the panel.
Incorrect - This hasn't been tightened
enough and you can no see a visible gap
between the rim and the panel.
55mm Maxifix Pin
QUANTITY - 8

8
Step 8
Slide the remaining leg onto the part assembled frame
ensuring that the maxifix pins engage into the maxifix
cams. Once in place tighten the cams using the 6mm
allen key that has been provided to lock the braces into
place.
7
Step 7
Slide the braces onto the leg panel ensuring that the
cam fittings engage over the maxifix pins. Once in
place tighten the cams using the 6mm allen key that
has been provided to lock the braces into place.
7

8
10
Step 10
Once in position fully tighten all furniture connectors, use a pozi
drive screwdriver turning the cams in a clockwise direction.
9
Step 9
Place your table top face down onto a clean dry surface and place the
assembled frame onto the top ensuring all fittings in the frame engage
into the furniture connectors that are pre inserted in the table top.

SLBB1100 / SLBB1500
SLAB 25 DINING BENCH
25.03.2019
1 2
1

1,2,3...
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
KEEP FITTINGS AWAY
FROM CHILDREN
2

Please check that you have all the panels!
3
Please check that you have all the hardware!
Furniture Connector Pin
RM-PIN01
QUANTITY - 8
35mm Maxifix Cam
QUANTITY - 8
55mm Maxifix Pin
QUANTITY - 8
M8 Low Profile Adjustable Foot
RM-FRL36
QUANTITY - 4
M8 Gesipa Insert
RM-NUT04
QUANTITY - 4
6mm Allen Key
QUANTITY - 1
1
OR
1050mm BENCH 1550mm BENCH
RM-WM25-TOP419 RM-WM25-TOP420
RM-WM25-BAC131RM-WM25-BAC130
RM-WM25-BAC131RM-WM25-BAC130
2
1
RM-WM25-LGP072 RM-WM25-LGP072

4
2
Step 2
Screw in the connector pins
into the pre drilled holes on
the panel. Ensure the screw
is inserted correctly as per
diagram B. Repeat for both
braces.
1
Step 1
Insert the maxifix cams into the
pre drilled holes on the support
brace. The cam should be
inserted as per diagram A.
Repeat for both braces.
û
ü
35mm Maxifix Cam
Ensure the arrow on
this fitting is aligned
with the hole that is
drilled on the edge of
the panel.
35mm Maxifix Cam
QUANTITY - 8
û
ü
Furniture Connector Pin
Ensure this pin is correctly inserted
into the panel. The flat rim of this pin
should sit against the edge of the
panel.
Furniture
Connector Pin
QUANTITY - 4
Diagram A
Diagram B
û
Incorrect - This has been overtightened and you can
no longer see the rim of the screw.
Correct - This has been inserted correctly.
The rim sits perfectly against the face of the panel.
Incorrect - This hasn't been tightened
enough and you can no see a visible gap
between the rim and the panel.

5
4
Step 4
Screw the adjustable feet into
the bottom of the leg panel.
Repeat for both legs.
3
Step 3
Knock in the gesipa inserts
into the holes on the bottom
edge of the leg.
Repeat for both legs.
M8 Low Profile Adjustable Foot
RM-FRL36
QUANTITY - 4
M8 Gesipa Insert
RM-NUT04
QUANTITY - 4

6
6
Step 6
Screw the maxifix pins into
the pre drilled holes on the
leg panels, ensure they are
screwed in fully so no
thread is left visible.
Repeat for both legs.
5
Step 5
Screw in the connector pins
into the pre drilled holes on
the leg panel. Ensure the
screw is inserted correctly
as per diagram C.
Repeat for both legs. û
ü
Furniture Connector Pin
Ensure this pin is correctly inserted
into the panel. The flat rim of this pin
should sit against the edge of the
panel.
Furniture
Connector Pin
QUANTITY - 4
Diagram C
û
Incorrect - This has been overtightened and you can
no longer see the rim of the screw.
Correct - This has been inserted correctly.
The rim sits perfectly against the face of the panel.
Incorrect - This hasn't been tightened
enough and you can no see a visible gap
between the rim and the panel.
55mm Maxifix Pin
QUANTITY - 8

8
Step 8
Slide the remaining leg onto the part assembled frame
ensuring that the maxifix pins engage into the maxifix
cams. Once in place tighten the cams using the 6mm
allen key that has been provided to lock the braces into
place.
7
Step 7
Slide the braces onto the leg panel ensuring that the
cam fittings engage over the maxifix pins. Once in
place tighten the cams using the 6mm allen key that
has been provided to lock the braces into place.
7

8
10
Step 10
Once in position fully tighten all furniture connectors, use a pozi
drive screwdriver turning the cams in a clockwise direction.
9
Step 9
Place the bench top face down onto a clean dry surface and place the
assembled frame onto the top ensuring all fittings in the frame engage
into the furniture connectors that are pre inserted in the top.