dams Anson AN-RET User manual

ASSEMBLY
INSTRUCTIONS
Anson
Executive Desk & Return
1
2 3 456
7 8 9 10 11 12
Pack 1:
1x Top Pack
1
2
3456
7 8 9 10 11 12
Pack 2:
1x 1000d Leg
Pack
14-03-2022
INS166
Anson - Executive Desk & Return
AN-RET
1 2
3
456
7 8 9 10 11 12
Pack 3:
1x 800d Support
Pack
1 2 3
4
56
7 8 9 10 11 12
Pack 5:
1x Return Unit
1 2 3
4
56
7 8 9 10 11 12
Pack 4:
1x Modesty
Panel Pack

1,2,3...
**mm
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
**mm
KEEP FITTINGS AWAY
FROM CHILDREN
4

Please check that you have all the parts
1 2 3 456
7 8 9 10 11 12
PACK 1:
2 x Top Pack
Connector Bolt - M6
Size PCS
20mm 34
CAM Fixture
Size PCS
40mm 3
FITTINGS SUPPLIED
Please check that you have all the ttings
Leg Fixing Bracket
Size PCS
25 x 80mm 6
1 2 3 456
7 8 9 10 11 12
PACK 2:
1 x 1000 Leg Pack
PACK 3:
1 x Support Panel Pack
1 2 3 456
7 8 9 10 11 12
Pin Fixture - M6
Size PCS
8mm x 30mm 3
1 2 3 456
7 8 9 10 11 12
PACK 4:
1 x Modesty Panel
Top Fixing Bracket
Size PCS
200 x 200mm 2
Spacer
Size PCS
20 x 20mm 3
PACK 5:
1 x Return Unit
1 2 3 456
7 8 9 10 11 12

Locate and attach the pins
as shown and tighten turning
clockwise.
ANSON EXEC DESK & RETURN ASSEMBLY
1
Step 1
2
Step 2
Unpack your new Anson
executive desk and please
recycle all packaging.
3
Step 3
Locate the brackets to the xing
holes and attach using the M6 x
20mm bolts as shown.

Locate and attach the pins
as shown and tighten turning
clockwise.
ANSON EXEC DESK & RETURN ASSEMBLY
4
Step 4
5
Step 5
Locate the adjustable feet as
shown turning clockwise to
tighten (anti-clockwise to adjust).
6
Step 6
Locate the brackets to the xing
holes and attach using the M6 x
20mm bolts as shown.
Insert the pins into the location
holes on the modesty panel and
tighten the cams turning clockwise.

Insert the large cams into the
modesty panel as shown.
ANSON EXEC DESK & RETURN ASSEMBLY
7
Step 7
8
Step 8
Locate the brackets to the xing
holes and attach using the M6 x
20mm bolts as shown.
9
Step 9
Slide the spacers over the pins
on the leg panel as shown.
Insert the pins into the location
holes on the modesty panel and
tighten the cams turning clockwise.

Insert the large cams into the
modesty panel as shown.
ANSON EXEC DESK & RETURN ASSEMBLY
10
Step 10
11
Step 11
Locate the support panel as
shown turning clockwise to
tighten (anti-clockwise to adjust).
12
Step 12
Slide the spacers over the pins
on the support panel as shown.
Insert the pins into the location
holes on the modesty panel and
tighten the cams turning clockwise.

Locate and attach the rail aligning
the holes located as shown using
the M6 x 20mm bolts and tighten.
ANSON EXEC DESK & RETURN ASSEMBLY
13
Step 13
14
Step 14
Locate and attach the rail aligning
the holes located as shown using
the M6 x 20mm bolts and tighten.
15
Step 15
Locate the modesty panel
support brackets to the xing
holes located on the rail and
the modesty panel.

Locate and attach the top
panel aligning the holes on
the underside of the top to the
xing brackets on the legs and
modesty panel.
ANSON EXEC DESK & RETURN ASSEMBLY
16
Step 16
17
Step 17
Afx the brackets as shown
using the M6 x 20mm bolts.
18
Step 18
Afx the brackets to the top
panel using the M6 x 20mm
bolts as shown.